Fittings

Stainless steel bailer springs for Laser/ILCA autobailer.

Holt/Nautos replica self-bailer for Laser/ILCA.

Drain plug assembly for the Laser and ILCA.

Rooster toestraps use a unique rubber compound that has a very high coefficient of friction, whilst also being light and durable.

These bailer spring plates are manufactured using the highest quality spring stainless steel, designed to both retract using spring tension, and at the same time providing a surface for the activator to push against to close the chute. 

Composite ball bearing cam cleat as supplied with the Laser cleat plate.

Complete autobailer for Laser. Can be used as a replacement bailer but is not legal for racing. 

Extra stiff, 10 cm wide Windesign PRO padded Laser/ILCA hiking strap. 

Clamcleat CL270 Racing Micro with Becket.

The becket holds the end of the rope under the cleat. No need for an extra fixing when rigging for 2:1 advantage. Small, neat and lightweight. The fairlead guides the rope into the teeth and advanced tooth technology holds all types of small rope.

The CL270AN is used on Laser tillers to give a 4:1 advantage without using a pulley block - see photo.

Manufactured from aluminium for a light weight and durable performance the Clamcleat® CL270 is available in two finishes:

1. CL270 has a silver stove enamel finish for a cost effective, high quality coating
2. CL270AN has a hard anodised finish to give a hard wearing surface.

Nut for mounting traveler eyelet fairlead for Laser.

Laser/ILCA rudder gudgeon.

Stainless steel rudder retaining clip for Laser/ILCA.

Brass cockpit drain bush set for the Laser and ILCA auto bailer.

Grey replacement grab rail for Laser/ILCA by Optiparts

Optiparts daggerboard friction plate for Laser/ILCA

Holt's cleats and base plate assembly for Laser/ILCA. Ready to be installed.

Holt Grab Rail suitable for all Laser Performance and ILCA Dinghies

Holt Laser/ILCA Replacement Bailer Bung.

Holt/Nautos 27 mm small stainless steel eye.

• Line size: 2 - 7 mm
• Hole centres: 27 mm
• Fixing size: M4

Laser/ ILCA control line cam cleats with angled base, Pro-lead and wire under-fairleads.

The base has been optimised with a small angle to ensure the control lines can easily be adjusted when hiking and the Pro-lead ensures the rope guides easily into the mouth of the cam cleat from any angle.

This product is ILCA and Laser class legal.

Holt/Nautos 38 mm aluminum cam cleat. 

• Line size: 5 - 12 mm
• Hole centres: 38 mm
• Fixing size: M5

Advanced metal replacement resin. Greater resistance to heat and UV stable. Lighter and stronger. Improved Jaw profle and vertical pillar design. Stronger and easier to release

Holt stainless steel spring

Screw plugs to mount the grabrail for Laser and ILCA. Set of 10 pcs.

Windesign replica block plate with 20mm ball bearing blocks for Laser/ILCA.

Laser/ILCA open ended fairlead. Ideal for the traveller system.