Home

Active filters

  • Brand: Holt
  • Brand: Marlow
  • Brand: Optiparts

Brand: Marlow

€4.08

The bio-based SK78 core is high strength and has minimal creep.

Ideal for Laser/ILCA outhaul, downhaul and vang systems.

The Technora blended cover gives the same fantastic abrasion and heat resistance properties as EXCEL ELITE. Technora blend cover adds grip for wet hands, and is easy to taper, showing colour matched ARMOURCOAT core.

Ideal for halyards, sheets and high strength control lines.

Brand: Marlow

€1.47

Marlow's heat set Doublebraid offers industry leading strength and stretch performance for a polyester braid-on-braid.

Flexibility and soft feel ensures easy handling - especially good for leisure marine yacht sheets. Easy splicing removes the need for bulky knots which also reduce a ropes strength. Also good for high load applications thanks to the heat setting process helping to reduce stretch and increase strength.

A great all-round rope.

Brand: Optiparts

€8.90

Clamcleat CL270 Racing Micro with Becket.

The becket holds the end of the rope under the cleat. No need for an extra fixing when rigging for 2:1 advantage. Small, neat and lightweight. The fairlead guides the rope into the teeth and advanced tooth technology holds all types of small rope.

The CL270AN is used on Laser tillers to give a 4:1 advantage without using a pulley block - see photo.

Manufactured from aluminium for a light weight and durable performance the Clamcleat® CL270 is available in two finishes:

  1. CL270 has a silver stove enamel finish for a cost effective, high quality coating
  2. CL270AN has a hard anodised finish to give a hard wearing surface.

Brand: Marlow

€14.45

Marlow's D2 Grandprix 78 Dyneema core with Technora/Polyester cover is ideal for as racing halyard or sheet. 

The upgrade to D2 Racing and ultimate standard production racing halyard or sheet. Manufactured using our bio-based D12 78 core or D12 99 core for additional strength and 50/50 Technora / Polyester cover to provide even greater performance in clutches, jammer and around winch's. Lightweight, low stretch, minimal creep with grippy, abrasion resistant cover for excellent jammer performance. D2 Grand Prix's blended cover grips well on winch drums and lasts during the toughest races thanks to its high melting point.

Brand: Optiparts

€10.75

Large, lightweight and durable handbailers. The wide ergonomic base creates more bailing capacity with each stroke, the curved bottom to follow the bailing motion and a triangular top so you don’t stuck behind the gunwale. High handle with end stop to prevent slipping out of your hand, with integrated shockcord fastening. Reinforced wear areas, rounded front lip and stackable for transportation.

Length 24 cm, width 17 cm

Brand: Optiparts

€210.00

This Optimist Silver regatta mast is less stiff than Blackgold spars and is ideal for lightweight Optimist sailors who just started racing.

It’s made of high quality aluminium tube and fitted with:

  • Aluminium halyard and downhaul Clamcleats EX1381
  • Stainless steel hook-in block backing plate Plain bearing hook-in block EX1340
  • Plain bearing 19 mm halyard block EX1332
  • Low friction wind indicator EX1243
  • Set of nylon top pins EX1338
  • Pin stop EX13372
  • Blue measurement band sticker EX1333B
  • 4 mm 2:1 polyester halyard

Brand: Optiparts

€135.00

The lightweight 40 mm Optimist SILVER regatta boom from Optiparts is much stiffer than the 32mm school boom and will allow the Optimist sailor to put more tension on the leach.

Fitted with:

  • Blue nylon V-cleat EX1405B
  • Pin stops EX13373
  • Red trimstrip EX1358R
  • 4 mm polyester outhaul
  • 3 mm Vectran bridle with ring
  • 3 mm Vectran boom preventer
  • 3 mm spliced Dyneema / 6 mm polyester vang

Brand: Optiparts

€17.95

PRO Daggerboard insert for Optimist.

This package includes 2 PRO front daggerboard inserts, 2 PRO back daggerboard inserts, made of wear resistant TPU rubber and comes with glue and sandpaper.

The PRO daggerboard inserts offer advantages over the EX1116; non-slip edges for improved grip within the daggerboard case, a pre-shaped contour to simplify positioning of the daggerboard and a sloping top design to prevent losing the inserts.

Brand: Optiparts

€189.95

Protect your Optimist hull from being scratched with this Optiparts UV resistant bottom cover.

Made of 320 gsm 600D solution dyed polyester with EVA backing, high quality 190T inner lining and closed cell foam in between.

Solution dyed polyester has much better color fastness and UV resistant characteristics than cheaper pigment dyed polyester. 

Brand: Optiparts

€43.95

The first book with over 75 specific exercises organized by category and difficulty to serve as a guideline and inspiration for coaches and trainers at clubs. The book Written by Pim Stumpel & Ben Koppelaar both award winning Dutch dinghy coaches. Pim & Ben have written down all the exercises they use to train and coach sailors. With the support of Huub Lambriex (1984 Olympic Tornado sailor and mental coach) they have created tools to help coaches, program-managers and sailors set goals and structurally train to become better sailors.

Language: English

Brand: Optiparts

€34.95

Optimist racing coach Attila Hodacs reveals 20 years of his coaching experience in this 85 page book. Topics included: The phases of development, how to lead optimist sailors to international level racing, setting up training sessions with different exercises, how to improve boathandling skills, strategy and how to minimize mistakes.

A must have for every trainer, coach or interested parent.

Brand: Optiparts

€18.50

The 130-page history, illustrated by almost as many photos mostly in colour, tells the story of how an ‘Orange Crate’ from Florida became the junior boat in over 120 countries.

It includes an 18-page supplement by Clifford McKay Jr., the first boy to sail the Optimist, with some fabulous photos of the early days. The story is taken up by Robert Wilkes who worked with the Optimist Class for over 35 years and had access to it’s archives. Young people tend to ask why things are the way they are. This history gives the answer for their beloved little boat..

Written by Robert Wilkes and Clifford McKay Jr.

Brand: Optiparts

€10.95

This releasable rubber joint for 16 mm tiller extension is mounted with an aluminium pin only. The rope core will avoid complete failure should the rubber tear.

Mounted with pin which is kept in place by a piece of heat shrinkable tubing. The distance between the mounting hole centres of all joints is 32 mm.

To remove a joint: simply cut off the tubing and push the pin out.