Home

Lightweight and high strength, single braid bio-based Dyneema SK78, with tough ArmourCoat finish

First quality, high elasticity, natural rubber provides a minimum 100% stretch with constant elongation characteristics

Low stretch and zero creep maintains sail set even when fully loaded over extended periods

The bio-based SK78 core is high strength and has minimal creep.

Ideal for Laser/ILCA outhaul, downhaul and vang systems.

The Technora blended cover gives the same fantastic abrasion and heat resistance properties as EXCEL ELITE. Technora blend cover adds grip for wet hands, and is easy to taper, showing colour matched ARMOURCOAT core.

Ideal for halyards, sheets and high strength control lines.

Holt/Nautos self-tailing winch.

Please refer to the attached file in the 'Technical Data Sheet' section below for more information.

Holt´s universal flexible tiller joint

Marlow's heat set Doublebraid offers industry leading strength and stretch performance for a polyester braid-on-braid.

Flexibility and soft feel ensures easy handling - especially good for leisure marine yacht sheets. Easy splicing removes the need for bulky knots which also reduce a ropes strength. Also good for high load applications thanks to the heat setting process helping to reduce stretch and increase strength.

A great all-round rope.

Low stretch, 100% Polyester rope offers great performance at a lower cost.

Marlow's High strength, lightweight with 100% Polyester cover and Dyneema® core for all round use on halyards, sheets and control lines.

Laser Mast Wear Kit contains two stripes of UHMWPE with acrylic adhesive on liner to be applied on the mast boot and mast collar complete to reduce the wear and tear of the gelcoat. 

Two stripes of 21 mm of width and 200 mm in length.

Ready to sail Holt replica Laser/ILCA boom, fitted with ball bearing blocks.

Holt replica sail for Laser Radial or ILCA 6. Batten set no included

Marlow's D2 Grandprix 78 Dyneema core with Technora/Polyester cover is ideal for as racing halyard or sheet. 

The upgrade to D2 Racing and ultimate standard production racing halyard or sheet. Manufactured using our bio-based D12 78 core or D12 99 core for additional strength and 50/50 Technora / Polyester cover to provide even greater performance in clutches, jammer and around winch's. Lightweight, low stretch, minimal creep with grippy, abrasion resistant cover for excellent jammer performance. D2 Grand Prix's blended cover grips well on winch drums and lasts during the toughest races thanks to its high melting point.

Holt's hiking strap for Laser/ILCA. Length of 870 mm. 

Holt replica aluminum top mast for Laser/ILCA.

Hard anodised CL270AN Micro Clamcleat.

The side entry fairlead allows ropes to be hooked in for cleating, yet easily removed. Small, neat and lightweight. Advanced tooth technology to hold all types of small rope. Integral becket allows riggging with a 2:1 ratio, without extra parts. Applications include Canoes & Kayaks (seat & rudder lines); Dinghy tiller lines. Manufactured from aluminium for light weight and durable performance.

The Clamcleat® CL277 is available in two finishes:

1. CL277 has a silver stove enamel finish for a cost effective, high quality coating.
2. CL277AN has a hard anodised finish to give a hard wearing surface.

CL278 is the Port version of this cleat. Using a CL823 Tapered Pad can aid rope alignment.

Laser 4.7/ILCA 4 Replica Lower Mast produced by Holt. 

Laser Radial/ILCA 6 Replica Lower Mast produced by Holt. 

Holt replica sail for Laser Standard or ILCA 7, horizontal cut. Batten set no included, folded.

Holt Mk2 replica sail for Laser Standard or ILCA 7. Batten set no included, delivered folded.

16 mmHPN rope stopper ball.

Maximum rope diameter: 5 mm. 

Available in blue, red, green, black and white

Light weight, high visibility floating line

Holt's cleats and base plate assembly for Laser/ILCA. Ready to be installed.

Holt Grab Rail suitable for all Laser Performance and ILCA Dinghies

Formuline is world renowned by windsurfers - the first and still the best line specifically designed for use on windsurf downhauls and outhauls. Formuline is the perfect diameter to fit most rigs and won't let you down - the ultimate rope for windsurfer downhauls and outhauls. High strength, light weight and incredibly durable.

Holt/Nautos block stand up base. Available in three different sizes. 

(please see chart below)

Holt/Nautos XR1 clutch with XTREME RELEASE function, designed to facilitate rope release under load.

• Rope Diameter: 6 to 12 mm
• Distance between holes: 79 mm
• Working Load: 550 Kg.

Please refer to the attached file in the 'Technical Data Sheet' section below for more information.

Holt/Nautos XR1 clutch with XTREME RELEASE function, designed to facilitate rope release under load.

• Rope Diameter: 6 to 12 mm
• Distance between holes: 79 mm
• Working Load: 550 Kg.

Please refer to the attached file in the 'Technical Data Sheet' section below for more information.

Holt/Nautos XR1 clutch with XTREME RELEASE function, designed to facilitate rope release under load.

• Rope Diameter: 6 to 12 mm
• Distance between holes: 79 mm
• Working Load: 550 Kg.

Please refer to the attached file in the 'Technical Data Sheet' section below for more information.

Holt/Nautos XR1 clutch with XTREME RELEASE function, designed to facilitate rope release under load.

• Rope Diameter: 6 to 12 mm
• Distance between holes: 79 mm
• Working Load: 550 Kg.

Please refer to the attached file in the 'Technical Data Sheet' section below for more information.

Holt/Nautos XR2 clutch with XTREME RELEASE function, designed to facilitate rope release under load.

• Rope Diameter: 10 to 16 mm
• Distance between fixing holes: 70 mm
• Working Load: 700 Kg.

Please refer to the attached file in the 'Technical Data Sheet' section below for more information.

Holt/Nautos standard mainsheet jammer, ideal for mainsheet systems.

• Maximum working load: 400 Kg.
• Distance between fixing holes: 20 mm.
• Fixing holes diameter: 5 mm.
• Weight: 360 grams. 
• Block not included

Holt splicing needles set.

Includes

• 4mm needle - 1 pc
• 5.5mm needle - 1 pc

Holt splicing needle

Nautos/Holt double deck organizer.

For dimensions and additional technical information, please check the "Datasheet" tab below.

Nautos/Holt triple deck organizer.

For dimensions and additional technical information, please check the "Datasheet" tab below.

Nautos/Holt triple deck organizer.

For dimensions and additional technical information, please check the "Datasheet" tab below.

Holt/Nautos XR2 double clutch with XTREME RELEASE function, designed to facilitate rope release under load.

• Rope Diameter: 10 to 16 mm
• Distance between fixing holes: 70 mm
• Working Load: 700 Kg.

Please refer to the attached file in the 'Technical Data Sheet' section below for more information.

Holt/Nautos XR2 triple clutch with XTREME RELEASE function, designed to facilitate rope release under load.

• Rope Diameter: 10 to 16 mm
• Distance between fixing holes: 70 mm
• Working Load: 700 Kg.

Please refer to the attached file in the 'Technical Data Sheet' section below for more information.

Holt/Nautos XR2 quadruple clutch with XTREME RELEASE function, designed to facilitate rope release under load.

• Rope Diameter: 10 to 16 mm
• Distance between fixing holes: 70 mm
• Working Load: 700 Kg.

Please refer to the attached file in the 'Technical Data Sheet' section below for more information.

Holt/Nautos 30mm Dynamic Ball Snatch Block.

Ideal for use on twinning Lines, sheet tidy, continuous furlers and code zero take ups

Holt/Nautos Plain 45mm violin swivel With cleat and becket.

High tensile carbon composite body. Strong and lightweight. Locking tri-rivet head maintains sheave rotation under higher loads.

Ideal for use on: mainsheet systems, control Lines, sheet blocks, vang cascades, cunningham systems and halyard leads.

Very strong alloy cleat, hard anodized. Used as Laser/ILCA outhaul and traveler cleat.

• Line diameter: 3 – 6 mm
• Hole centres: 66 mm
• Length: 82 mm
• Width: 18 mm
• Height: 23 mm
• Bolt size: M5
• Screw size: 4.8
• Weight: 34 gms

Vernier adjuster, ideal for dinghy sailiing

Low-friction 40mm web tie sheave. 

Specifications

• Rope diameter: 2 a 10 mm
• Breaking load: 1800 Kg. 
• Safe working load: 900 Kg.
• Weight: 17.5 g. 

Clamcleat CL218 Mk1 with side entry fairlead.

The side entry fairlead allows ropes to be hooked in for cleating, yet easily removed. Ideal as a reaching hook.

Holt/Nautos replica self-bailer for Laser/ILCA.