Home

If you are looking for a glove suited to mainsheet trimming; where releasing the sheet is just as important as pulling in, the Dura Pro may be the answer. With double layer top quality abrasion resistant Amara on all high load/stress areas, these gloves are extremely supple with excellent grip and are perfect for all helming duties.

Rooster Sailing Quick Dry Visor with contrast black back mesh panel and rooster styling, available in Black, Red or Navy Blue.

The Rooster Pro Lite Aquafleece top combines a soft, durable and flexible polyurethane outer coating with a light fleece inner layer to keep you snug and warm. 

Holt/Nautos replica self-bailer for Laser/ILCA.

Holt replacement rudder head for Laser/ILCA.

Rooster's low profile neoprene buoyancy aid, ideal for dinghy racing. 

Rooster's Polilite rope, ideal for Laser/ILCA. 14 meters in length, 7 mm diameter

Holt/Nautos self-tailing winch.

Please refer to the attached file in the 'Technical Data Sheet' section below for more information.

Keep hydrated and limit single use plastic with our bottle! Suitable for any occasion, our durable 710ml capacity drinks bottle has an ergonomic nozzle for easy drinking and increased water flow.

Perfectly suited to be used with Rooster's Joey Bottle Holder. 

Rooster Sailing sport sunglass strap. 

If you are looking for a glove suited to mainsheet trimming; where releasing the sheet is just as important as pulling in, the Dura Pro may be the answer. With double layer top quality abrasion resistant Amara on all high load/stress areas, these gloves are extremely supple with excellent grip and are perfect for all helming duties.

Rooster's Polilite rope, ideal for Laser/ILCA. 14 meters in length.

Rooster´s warmest glove yet.

Low bulk, lightweight performance Rooster spray top perfect for those wet windy moderate to hot days where you don’t need the warmth of the Aquafleece® but want a bit more protection from the elements. This breathable and waterproof top packs up small enough to easily stuff into your 10L drybag for easy storage.

Holt´s universal flexible tiller joint

Supplied with rigging pack:

• 1 x Harken ball bearing hook-in block
• 1 x Windesign 25 mm low friction ring
• 1 x Windesign wind indicator PRO
• 1 x Deck collar with mast sleeve
• 1 x Nylon sprit adjuster handle
• 2 x Nylon top pins
• 1 x Dyneema primary halyard line
• 1 x Technora / Dyneema secondary halyard line 5 x 2.2 mm tack lines 12 x 1.2 mm double lacing lines

Holt 20mm Dynamic double block with becket

Rooster toestraps use a unique rubber compound that has a very high coefficient of friction, whilst also being light and durable.

Rooster's 50mm clew strap suitable for Laser/ILCA.

These bailer spring plates are manufactured using the highest quality spring stainless steel, designed to both retract using spring tension, and at the same time providing a surface for the activator to push against to close the chute. 

Rooster Sailing foils bag suitable for Laser and ILCA

The most flexible and active mast which is designed for light weight sailors.

The MK3 Flex mast for the Optimist is suitable for sailors under 35 kg.

A light and flexible racing sprit. The MK3 Flex 26.6 mm sprit for the Optimist is suitable for sailors under 35 kg.

• Superior Lanurep spacecraft alloy
• Anodized to a dark grey color
• Grey glass fibre filled Nylon sprit ends
• 15 cm heat shrinkable sprit protection tubing, prevents wear between mast and sprit

The most flexible racing sprit creates less distortion of the sail shape and provides an active change of tension on the leech. For the more experienced sailor who can adjust their mainsheet tension constantly.

The MK3 Hyperflex 28 mm sprit for the Optimist is suitable for sailors under 35 kg.

The newest mast in the Optimax range. The MK3 Medium mast fits perfectly in our existing mast range and is 8% more flexible compared to the MK3 mast and 8% stiffer compared to the MK3 Flex mast.

The MK3 Medium mast for the Optimist is suitable for sailors from 30 to 40 kg.

Ready to sail Holt replica Laser/ILCA boom, fitted with ball bearing blocks.

Holt replica sail for Laser Radial or ILCA 6. Batten set no included

Rooster Sailing Optimist foil bag.

Holt's hiking strap for Laser/ILCA. Length of 870 mm. 

Holt replica aluminum top mast for Laser/ILCA.

Optimax deck collar for Optimist, made of Delrin to create minimal friction between the sleeve and the collar. 

Holt's 20mm Dynamic Double Block

A stiffer 45 mm racing boom which is suitbale for the more experienced, heavier weight sailors. The MK4 45 mm boom for the Optimist is suitable for sailors above 45 kg.

A light and flexible all-round boom which can be used with all masts and sprits. The MK3 40 mm boom for the Optimist is suitable for sailors from 35 to 45 kg.

This all-round racing mast is designed for mid weight sailors and can be matched with all booms and sprits. The MK3 mast for the Optimist is suitable for sailors from 35 to 45 kg.

This all-round racing mast is designed for mid weight sailors and can be matched with all booms and sprits. The MK3 mast for the Optimist is suitable for sailors from 35 to 45 kg.

A pack of three green and three red self adhesive wool telltales (with TEFLON treatment) that don´t stick to the sail in the wet.

Laser 4.7/ILCA 4 Replica Lower Mast produced by Holt. 

Laser Radial/ILCA 6 Replica Lower Mast produced by Holt. 

Holt replica sail for Laser Standard or ILCA 7, horizontal cut. Batten set no included, folded.

Holt Mk2 replica sail for Laser Standard or ILCA 7. Batten set no included, delivered folded.

Gorilla tiller for Laser/ILCA. 

Ideal for sailing clubs and schools. 

An allround sprit which can be used with all masts and booms. The MK3 27 mm sprit for the Optimist is suitable for sailors from 35 to 45 kg.

• Superior Lanurep spacecraft alloy
• Anodized to a dark grey color
• Grey glass fibre filled
• Nylon sprit ends
• 15 cm heat shrinkable sprit protection tubing, prevents wear between mast and sprit

Rooster Sailing self adhesive grip tape for use on your deck.

Moulds to fit the surface applied to providing a strong connection and durable grip. When you want to remove it, it's easy and clean and does not leave any residue when peeled off.

Available in a number of colours.

• Width: 100 mm
• Length: 2 meters
• Thickness: 2.5 mm

As supplied with Optimax masts and Optimax spar sets.

• 1 x Harken ball bearing hook-in block
• 1 x Windesign 25 mm low friction ring
• 1 x Windesign wind indicator PRO
• 1 x Deck collar with mast sleeve
• 1 x Nylon sprit adjuster handle
• 2 x Nylon top pins
• 1 x Dyneema primary halyard line
• 1 x Technora / Dyneema secondary halyard line
• 5 x 2.2 mm tack lines
• 12 x 1.2 mm double lacing lines

A lightweight yet ultra stiff and powerful 48 mm racing boom which is mainly suitable for the more experienced, heavier weight sailors above 45 kg.

16 mmHPN rope stopper ball.

Maximum rope diameter: 5 mm. 

Available in blue, red, green, black and white

Rooster's Polilite rope, ideal for mainsheet applications on racing dinghies.

Neoprene sleeve bottle holder with adjustable webbing straps at each end to fit around different circumferences of tube.

Holt's cleats and base plate assembly for Laser/ILCA. Ready to be installed.

Rooster Sailing's all purpose boot, suitable for al water sports. 

Holt Grab Rail suitable for all Laser Performance and ILCA Dinghies

Holt/Nautos block stand up base. Available in three different sizes. 

(please see chart below)

Holt/Nautos XR1 clutch with XTREME RELEASE function, designed to facilitate rope release under load.

• Rope Diameter: 6 to 12 mm
• Distance between holes: 79 mm
• Working Load: 550 Kg.

Please refer to the attached file in the 'Technical Data Sheet' section below for more information.

Holt/Nautos XR1 clutch with XTREME RELEASE function, designed to facilitate rope release under load.

• Rope Diameter: 6 to 12 mm
• Distance between holes: 79 mm
• Working Load: 550 Kg.

Please refer to the attached file in the 'Technical Data Sheet' section below for more information.

Holt/Nautos XR1 clutch with XTREME RELEASE function, designed to facilitate rope release under load.

• Rope Diameter: 6 to 12 mm
• Distance between holes: 79 mm
• Working Load: 550 Kg.

Please refer to the attached file in the 'Technical Data Sheet' section below for more information.

Holt/Nautos XR1 clutch with XTREME RELEASE function, designed to facilitate rope release under load.

• Rope Diameter: 6 to 12 mm
• Distance between holes: 79 mm
• Working Load: 550 Kg.

Please refer to the attached file in the 'Technical Data Sheet' section below for more information.