Home
Active filters
Filter By
Brand
Brand
Active filters
If you are looking for a glove suited to mainsheet trimming; where releasing the sheet is just as important as pulling in, the Dura Pro may be the answer. With double layer top quality abrasion resistant Amara on all high load/stress areas, these gloves are extremely supple with excellent grip and are perfect for all helming duties.
Compact and extremely strong blocks. Ultra lightweight for mainsheets and control lines.
Lightweight and high strength, single braid bio-based Dyneema SK78, with tough ArmourCoat finish
Stainless steel double pad eye for Laser outhaul and cunningham upgrade. Supplied with 29mm ball bearing Harken blocks.
Low stretch and zero creep maintains sail set even when fully loaded over extended periods
The bio-based SK78 core is high strength and has minimal creep.
Ideal for Laser/ILCA outhaul, downhaul and vang systems.
The Technora blended cover gives the same fantastic abrasion and heat resistance properties as EXCEL ELITE. Technora blend cover adds grip for wet hands, and is easy to taper, showing colour matched ARMOURCOAT core.
Ideal for halyards, sheets and high strength control lines.
Rooster's Polilite rope, ideal for Laser/ILCA. 14 meters in length, 7 mm diameter
Keep hydrated and limit single use plastic with our bottle! Suitable for any occasion, our durable 710ml capacity drinks bottle has an ergonomic nozzle for easy drinking and increased water flow.
Perfectly suited to be used with Rooster's Joey Bottle Holder.
If you are looking for a glove suited to mainsheet trimming; where releasing the sheet is just as important as pulling in, the Dura Pro may be the answer. With double layer top quality abrasion resistant Amara on all high load/stress areas, these gloves are extremely supple with excellent grip and are perfect for all helming duties.
Rooster's Polilite rope, ideal for Laser/ILCA. 14 meters in length.
Marlow's heat set Doublebraid offers industry leading strength and stretch performance for a polyester braid-on-braid.
Flexibility and soft feel ensures easy handling - especially good for leisure marine yacht sheets. Easy splicing removes the need for bulky knots which also reduce a ropes strength. Also good for high load applications thanks to the heat setting process helping to reduce stretch and increase strength.
A great all-round rope.
Rooster toestraps use a unique rubber compound that has a very high coefficient of friction, whilst also being light and durable.
Rooster's 50mm clew strap suitable for Laser/ILCA.
These bailer spring plates are manufactured using the highest quality spring stainless steel, designed to both retract using spring tension, and at the same time providing a surface for the activator to push against to close the chute.
Compact and extremely strong blocks. Ultra lightweight for mainsheets and control lines. These blocks can be used as becket blocks too.
Compact, ultra lightweight and extremely strong. For dinghy mainsheets and control lines.
Harken 18mm Fly-Soft block, ideal to be used on outhaul or downhaul systems for Laser/ILCA. Also suitable for other classes.
Low stretch, 100% Polyester rope offers great performance at a lower cost.
Marlow's High strength, lightweight with 100% Polyester cover and Dyneema® core for all round use on halyards, sheets and control lines.
Official batten set for ILCA 4 and ILCA 6. Also suitable for Laser 4.7 and Laser Radial.
Harken ball bearing cam cleats, 38 mm fastener spacing. Ideal for racing dinghies.
Marlow's D2 Grandprix 78 Dyneema core with Technora/Polyester cover is ideal for as racing halyard or sheet.
The upgrade to D2 Racing and ultimate standard production racing halyard or sheet. Manufactured using our bio-based D12 78 core or D12 99 core for additional strength and 50/50 Technora / Polyester cover to provide even greater performance in clutches, jammer and around winch's. Lightweight, low stretch, minimal creep with grippy, abrasion resistant cover for excellent jammer performance. D2 Grand Prix's blended cover grips well on winch drums and lasts during the toughest races thanks to its high melting point.
Official batten set for ILCA 7. Also suitable for Laser Standard
Gorilla Sailing fully padded Optimist Combi foil bag.
Harken 40mm block on Dyneema with shackle, for the Optimist mainsheet.
Harken hook-in block for the Optimist halyard system.
Harken 57mm carbo ratchet block, model 2135, used as Optimist mainsheet block and Laser mainsheet block.
Harken 40mm carbo ratchet block, used as Optimist mainsheet block and Laser mainsheet block.
A pack of three green and three red self adhesive wool telltales (with TEFLON treatment) that don´t stick to the sail in the wet.
Rooster Sailing self adhesive grip tape for use on your deck.
Moulds to fit the surface applied to providing a strong connection and durable grip. When you want to remove it, it's easy and clean and does not leave any residue when peeled off.
Available in a number of colours.
Rooster's Polilite rope, ideal for mainsheet applications on racing dinghies.
Neoprene sleeve bottle holder with adjustable webbing straps at each end to fit around different circumferences of tube.
ILCA Class Legal cleat plate complete, with Harken cleats.
DSK Foils daggerboard for Optimist.
Used by top sailors worldwide.
DSK Foils rudder and daggerboard set for Optimist.
Used by top sailors worldwide.
The 16 mm is Harken’s smallest block. It is perfect for small synthetic control lines found on high-tech dinghies.
The patented bearing system uses stainless steel balls in a captive grooved race and has a 250 lb (113 kg) maximum working load.
The 404 uses an O-ring to keep the line in the sheave during intermittent loading.
Harken 4029 mm link block on Dyneema with shackle, for the Optimist mainsheet.
Harken model 2135 57mm ratchet block, used as Optimist mainsheet block with 2-way link.