Home

Holt/Nautos self-tailing winch.

Please refer to the attached file in the 'Technical Data Sheet' section below for more information.

Holt´s universal flexible tiller joint

Supplied with rigging pack:

• 1 x Harken ball bearing hook-in block
• 1 x Windesign 25 mm low friction ring
• 1 x Windesign wind indicator PRO
• 1 x Deck collar with mast sleeve
• 1 x Nylon sprit adjuster handle
• 2 x Nylon top pins
• 1 x Dyneema primary halyard line
• 1 x Technora / Dyneema secondary halyard line 5 x 2.2 mm tack lines 12 x 1.2 mm double lacing lines

Allen Brothers' Dynamic 20mm Single Tie-On block. Suitable for the downhaul and outhaul systems of Laser/ILCA. 

The most flexible and active mast which is designed for light weight sailors.

The MK3 Flex mast for the Optimist is suitable for sailors under 35 kg.

A light and flexible racing sprit. The MK3 Flex 26.6 mm sprit for the Optimist is suitable for sailors under 35 kg.

• Superior Lanurep spacecraft alloy
• Anodized to a dark grey color
• Grey glass fibre filled Nylon sprit ends
• 15 cm heat shrinkable sprit protection tubing, prevents wear between mast and sprit

The newest mast in the Optimax range. The MK3 Medium mast fits perfectly in our existing mast range and is 8% more flexible compared to the MK3 mast and 8% stiffer compared to the MK3 Flex mast.

The MK3 Medium mast for the Optimist is suitable for sailors from 30 to 40 kg.

Ready to sail Holt replica Laser/ILCA boom, fitted with ball bearing blocks.

Holt replica sail for Laser Radial or ILCA 6. Batten set no included

Holt's hiking strap for Laser/ILCA. Length of 870 mm. 

Holt replica aluminum top mast for Laser/ILCA.

Optimax deck collar for Optimist, made of Delrin to create minimal friction between the sleeve and the collar. 

A stiffer 45 mm racing boom which is suitbale for the more experienced, heavier weight sailors. The MK4 45 mm boom for the Optimist is suitable for sailors above 45 kg.

A light and flexible all-round boom which can be used with all masts and sprits. The MK3 40 mm boom for the Optimist is suitable for sailors from 35 to 45 kg.

This all-round racing mast is designed for mid weight sailors and can be matched with all booms and sprits. The MK3 mast for the Optimist is suitable for sailors from 35 to 45 kg.

This all-round racing mast is designed for mid weight sailors and can be matched with all booms and sprits. The MK3 mast for the Optimist is suitable for sailors from 35 to 45 kg.

Laser 4.7/ILCA 4 Replica Lower Mast produced by Holt. 

Laser Radial/ILCA 6 Replica Lower Mast produced by Holt. 

Holt replica sail for Laser Standard or ILCA 7, horizontal cut. Batten set no included, folded.

Holt Mk2 replica sail for Laser Standard or ILCA 7. Batten set no included, delivered folded.

An allround sprit which can be used with all masts and booms. The MK3 27 mm sprit for the Optimist is suitable for sailors from 35 to 45 kg.

• Superior Lanurep spacecraft alloy
• Anodized to a dark grey color
• Grey glass fibre filled
• Nylon sprit ends
• 15 cm heat shrinkable sprit protection tubing, prevents wear between mast and sprit

As supplied with Optimax masts and Optimax spar sets.

• 1 x Harken ball bearing hook-in block
• 1 x Windesign 25 mm low friction ring
• 1 x Windesign wind indicator PRO
• 1 x Deck collar with mast sleeve
• 1 x Nylon sprit adjuster handle
• 2 x Nylon top pins
• 1 x Dyneema primary halyard line
• 1 x Technora / Dyneema secondary halyard line
• 5 x 2.2 mm tack lines
• 12 x 1.2 mm double lacing lines

A lightweight yet ultra stiff and powerful 48 mm racing boom which is mainly suitable for the more experienced, heavier weight sailors above 45 kg.

16 mmHPN rope stopper ball.

Maximum rope diameter: 5 mm. 

Available in blue, red, green, black and white

Holt's cleats and base plate assembly for Laser/ILCA. Ready to be installed.

Holt Grab Rail suitable for all Laser Performance and ILCA Dinghies

Holt/Nautos block stand up base. Available in three different sizes. 

(please see chart below)

Allen Brothers Laser / ILCA Lower Vang Unit.

This Laser vang unit offers ultimate control over your vang control line. The cam cleat is mounted to a swivel, this ensures you can pull the vang control line from any angle and with minimal friction.

The block formation of our Laser / ILCA vang unit ensures the vang control line does not twist under load.

Easily attached to the Laser / ILCA mast tang with a nut and bolt.

Also featured is a removable clevis pin which can be used to dead-end the Cunningham control line.

This product is ILCA and Laser class legal.

Laser/ ILCA control line cam cleats with angled base, Pro-lead and wire under-fairleads.

The base has been optimised with a small angle to ensure the control lines can easily be adjusted when hiking and the Pro-lead ensures the rope guides easily into the mouth of the cam cleat from any angle.

This product is ILCA and Laser class legal.

Holt/Nautos XR1 clutch with XTREME RELEASE function, designed to facilitate rope release under load.

• Rope Diameter: 6 to 12 mm
• Distance between holes: 79 mm
• Working Load: 550 Kg.

Please refer to the attached file in the 'Technical Data Sheet' section below for more information.

Holt/Nautos XR1 clutch with XTREME RELEASE function, designed to facilitate rope release under load.

• Rope Diameter: 6 to 12 mm
• Distance between holes: 79 mm
• Working Load: 550 Kg.

Please refer to the attached file in the 'Technical Data Sheet' section below for more information.

Holt/Nautos XR1 clutch with XTREME RELEASE function, designed to facilitate rope release under load.

• Rope Diameter: 6 to 12 mm
• Distance between holes: 79 mm
• Working Load: 550 Kg.

Please refer to the attached file in the 'Technical Data Sheet' section below for more information.

Holt/Nautos XR1 clutch with XTREME RELEASE function, designed to facilitate rope release under load.

• Rope Diameter: 6 to 12 mm
• Distance between holes: 79 mm
• Working Load: 550 Kg.

Please refer to the attached file in the 'Technical Data Sheet' section below for more information.

Holt/Nautos XR2 clutch with XTREME RELEASE function, designed to facilitate rope release under load.

• Rope Diameter: 10 to 16 mm
• Distance between fixing holes: 70 mm
• Working Load: 700 Kg.

Please refer to the attached file in the 'Technical Data Sheet' section below for more information.

Holt/Nautos standard mainsheet jammer, ideal for mainsheet systems.

• Maximum working load: 400 Kg.
• Distance between fixing holes: 20 mm.
• Fixing holes diameter: 5 mm.
• Weight: 360 grams. 
• Block not included

Holt splicing needles set.

Includes

• 4mm needle - 1 pc
• 5.5mm needle - 1 pc

Holt splicing needle

Nautos/Holt double deck organizer.

For dimensions and additional technical information, please check the "Datasheet" tab below.

Nautos/Holt triple deck organizer.

For dimensions and additional technical information, please check the "Datasheet" tab below.

Nautos/Holt triple deck organizer.

For dimensions and additional technical information, please check the "Datasheet" tab below.

Holt/Nautos XR2 double clutch with XTREME RELEASE function, designed to facilitate rope release under load.

• Rope Diameter: 10 to 16 mm
• Distance between fixing holes: 70 mm
• Working Load: 700 Kg.

Please refer to the attached file in the 'Technical Data Sheet' section below for more information.

Holt/Nautos XR2 triple clutch with XTREME RELEASE function, designed to facilitate rope release under load.

• Rope Diameter: 10 to 16 mm
• Distance between fixing holes: 70 mm
• Working Load: 700 Kg.

Please refer to the attached file in the 'Technical Data Sheet' section below for more information.

Holt/Nautos XR2 quadruple clutch with XTREME RELEASE function, designed to facilitate rope release under load.

• Rope Diameter: 10 to 16 mm
• Distance between fixing holes: 70 mm
• Working Load: 700 Kg.

Please refer to the attached file in the 'Technical Data Sheet' section below for more information.

Holt/Nautos 30mm Dynamic Ball Snatch Block.

Ideal for use on twinning Lines, sheet tidy, continuous furlers and code zero take ups

Holt/Nautos Plain 45mm violin swivel With cleat and becket.

High tensile carbon composite body. Strong and lightweight. Locking tri-rivet head maintains sheave rotation under higher loads.

Ideal for use on: mainsheet systems, control Lines, sheet blocks, vang cascades, cunningham systems and halyard leads.

Vernier adjuster, ideal for dinghy sailiing

Low-friction 40mm web tie sheave. 

Specifications

• Rope diameter: 2 a 10 mm
• Breaking load: 1800 Kg. 
• Safe working load: 900 Kg.
• Weight: 17.5 g. 

The most flexible racing sprit creates less distortion of the sail shape and provides an active change of tension on the leech. For the more experienced sailor who can adjust their mainsheet tension constantly.

The MK3 Hyperflex 28 mm sprit for the Optimist is suitable for sailors under 35 kg.

Holt/Nautos replica self-bailer for Laser/ILCA.