Filter By
Brand
Brand
If you are looking for a glove suited to mainsheet trimming; where releasing the sheet is just as important as pulling in, the Dura Pro may be the answer. With double layer top quality abrasion resistant Amara on all high load/stress areas, these gloves are extremely supple with excellent grip and are perfect for all helming duties.
Compact and extremely strong blocks. Ultra lightweight for mainsheets and control lines.
Stainless steel double pad eye for Laser outhaul and cunningham upgrade. Supplied with 29mm ball bearing Harken blocks.
The Rooster Pro Lite Aquafleece top combines a soft, durable and flexible polyurethane outer coating with a light fleece inner layer to keep you snug and warm.
Rooster's Polilite rope, ideal for Laser/ILCA. 14 meters in length, 7 mm diameter
Keep hydrated and limit single use plastic with our bottle! Suitable for any occasion, our durable 710ml capacity drinks bottle has an ergonomic nozzle for easy drinking and increased water flow.
Perfectly suited to be used with Rooster's Joey Bottle Holder.
If you are looking for a glove suited to mainsheet trimming; where releasing the sheet is just as important as pulling in, the Dura Pro may be the answer. With double layer top quality abrasion resistant Amara on all high load/stress areas, these gloves are extremely supple with excellent grip and are perfect for all helming duties.
Rooster's Polilite rope, ideal for Laser/ILCA. 14 meters in length.
Low bulk, lightweight performance Rooster spray top perfect for those wet windy moderate to hot days where you don’t need the warmth of the Aquafleece® but want a bit more protection from the elements. This breathable and waterproof top packs up small enough to easily stuff into your 10L drybag for easy storage.
Rooster toestraps use a unique rubber compound that has a very high coefficient of friction, whilst also being light and durable.
Rooster's 50mm clew strap suitable for Laser/ILCA.
These bailer spring plates are manufactured using the highest quality spring stainless steel, designed to both retract using spring tension, and at the same time providing a surface for the activator to push against to close the chute.
Compact and extremely strong blocks. Ultra lightweight for mainsheets and control lines. These blocks can be used as becket blocks too.
Compact, ultra lightweight and extremely strong. For dinghy mainsheets and control lines.
Harken 18mm Fly-Soft block, ideal to be used on outhaul or downhaul systems for Laser/ILCA. Also suitable for other classes.
Harken ball bearing cam cleats, 38 mm fastener spacing. Ideal for racing dinghies.
Harken 40mm block on Dyneema with shackle, for the Optimist mainsheet.
Harken hook-in block for the Optimist halyard system.
Harken 57mm carbo ratchet block, model 2135, used as Optimist mainsheet block and Laser mainsheet block.
Harken 40mm carbo ratchet block, used as Optimist mainsheet block and Laser mainsheet block.
A pack of three green and three red self adhesive wool telltales (with TEFLON treatment) that don´t stick to the sail in the wet.
Rooster Sailing self adhesive grip tape for use on your deck.
Moulds to fit the surface applied to providing a strong connection and durable grip. When you want to remove it, it's easy and clean and does not leave any residue when peeled off.
Available in a number of colours.
Harken 57mm carbo ratchet block with 1.5X grip, model 2166, used as Optimist mainsheet block and Laser mainsheet block.
Rooster's Polilite rope, ideal for mainsheet applications on racing dinghies.
Neoprene sleeve bottle holder with adjustable webbing straps at each end to fit around different circumferences of tube.
Rooster Sailing's all purpose boot, suitable for al water sports.
ILCA Class Legal cleat plate complete, with Harken cleats.
Waxed whipping twine, useful for finishing the ends of rope or for adding a stitch to the join in spliced ropes.
0.8mm diameter with approx. 50m on a roll - priced per roll.
The 16 mm is Harken’s smallest block. It is perfect for small synthetic control lines found on high-tech dinghies.
The patented bearing system uses stainless steel balls in a captive grooved race and has a 250 lb (113 kg) maximum working load.
The 404 uses an O-ring to keep the line in the sheave during intermittent loading.
McLube Hullkote speed polish, for use on fiberglass, metal, plexiglass and painted surfaces
Size: 16 oz (423 ml)
Harken 4029 mm link block on Dyneema with shackle, for the Optimist mainsheet.
Harken model 2135 57mm ratchet block, used as Optimist mainsheet block with 2-way link.
Rooster's low profile neoprene buoyancy aid, ideal for dinghy racing.