Home
Active filters
Filter By
Brand
Brand
Active filters
If you are looking for a glove suited to mainsheet trimming; where releasing the sheet is just as important as pulling in, the Dura Pro may be the answer. With double layer top quality abrasion resistant Amara on all high load/stress areas, these gloves are extremely supple with excellent grip and are perfect for all helming duties.
Allen plain bearing single block with fork head and vang key. Recommended for Laser/ILCA.
Rooster Sailing Quick Dry Visor with contrast black back mesh panel and rooster styling, available in Black, Red or Navy Blue.
The Rooster Pro Lite Aquafleece top combines a soft, durable and flexible polyurethane outer coating with a light fleece inner layer to keep you snug and warm.
Rooster's low profile neoprene buoyancy aid, ideal for dinghy racing.
Rooster's Polilite rope, ideal for Laser/ILCA. 14 meters in length, 7 mm diameter
Keep hydrated and limit single use plastic with our bottle! Suitable for any occasion, our durable 710ml capacity drinks bottle has an ergonomic nozzle for easy drinking and increased water flow.
Perfectly suited to be used with Rooster's Joey Bottle Holder.
If you are looking for a glove suited to mainsheet trimming; where releasing the sheet is just as important as pulling in, the Dura Pro may be the answer. With double layer top quality abrasion resistant Amara on all high load/stress areas, these gloves are extremely supple with excellent grip and are perfect for all helming duties.
Rooster's Polilite rope, ideal for Laser/ILCA. 14 meters in length.
Low bulk, lightweight performance Rooster spray top perfect for those wet windy moderate to hot days where you don’t need the warmth of the Aquafleece® but want a bit more protection from the elements. This breathable and waterproof top packs up small enough to easily stuff into your 10L drybag for easy storage.
Allen Brothers' Dynamic 20mm Single Tie-On block. Suitable for the downhaul and outhaul systems of Laser/ILCA.
Rooster toestraps use a unique rubber compound that has a very high coefficient of friction, whilst also being light and durable.
Single High Load Dynamic Fork Head With SA.873 Vang Key. Designed for use in ILCA/ Laser Vang System.
Rooster's 50mm clew strap suitable for Laser/ILCA.
These bailer spring plates are manufactured using the highest quality spring stainless steel, designed to both retract using spring tension, and at the same time providing a surface for the activator to push against to close the chute.
Allen's TiiTAN ultralight titanium block specifically designed for the Laser/ILCA vang.
Allen's 20mm Double Dynamic Tii-On Block. Ideal for the Laser/ILCA vang system, but it may be used for other systems and classes.
Laser Mast Wear Kit contains two stripes of UHMWPE with acrylic adhesive on liner to be applied on the mast boot and mast collar complete to reduce the wear and tear of the gelcoat.
Two stripes of 21 mm of width and 200 mm in length.
Hard anodised CL270AN Micro Clamcleat.
The side entry fairlead allows ropes to be hooked in for cleating, yet easily removed. Small, neat and lightweight. Advanced tooth technology to hold all types of small rope. Integral becket allows riggging with a 2:1 ratio, without extra parts. Applications include Canoes & Kayaks (seat & rudder lines); Dinghy tiller lines. Manufactured from aluminium for light weight and durable performance.
The Clamcleat® CL277 is available in two finishes:
CL278 is the Port version of this cleat. Using a CL823 Tapered Pad can aid rope alignment.
A pack of three green and three red self adhesive wool telltales (with TEFLON treatment) that don´t stick to the sail in the wet.
Rooster Sailing self adhesive grip tape for use on your deck.
Moulds to fit the surface applied to providing a strong connection and durable grip. When you want to remove it, it's easy and clean and does not leave any residue when peeled off.
Available in a number of colours.
Rooster's Polilite rope, ideal for mainsheet applications on racing dinghies.
Neoprene sleeve bottle holder with adjustable webbing straps at each end to fit around different circumferences of tube.
Rooster Sailing's all purpose boot, suitable for al water sports.
Allen Brothers' 30mm Single High Load Dynamic Tii-On Block.
Allen Brothers Laser / ILCA Lower Vang Unit.
This Laser vang unit offers ultimate control over your vang control line. The cam cleat is mounted to a swivel, this ensures you can pull the vang control line from any angle and with minimal friction.
The block formation of our Laser / ILCA vang unit ensures the vang control line does not twist under load.
Easily attached to the Laser / ILCA mast tang with a nut and bolt.
Also featured is a removable clevis pin which can be used to dead-end the Cunningham control line.
This product is ILCA and Laser class legal.
Laser/ ILCA control line cam cleats with angled base, Pro-lead and wire under-fairleads.
The base has been optimised with a small angle to ensure the control lines can easily be adjusted when hiking and the Pro-lead ensures the rope guides easily into the mouth of the cam cleat from any angle.
This product is ILCA and Laser class legal.
Waxed whipping twine, useful for finishing the ends of rope or for adding a stitch to the join in spliced ropes.
0.8mm diameter with approx. 50m on a roll - priced per roll.
Very strong alloy cleat, hard anodized. Used as Laser/ILCA outhaul and traveler cleat.
Clamcleat CL218 Mk1 with side entry fairlead.
The side entry fairlead allows ropes to be hooked in for cleating, yet easily removed. Ideal as a reaching hook.