PRO Daggerboard insert for Optimist.

This package includes 2 PRO front daggerboard inserts, 2 PRO back daggerboard inserts, made of wear resistant TPU rubber and comes with glue and sandpaper.

The PRO daggerboard inserts offer advantages over the EX1116; non-slip edges for improved grip within the daggerboard case, a pre-shaped contour to simplify positioning of the daggerboard and a sloping top design to prevent losing the inserts.

16 mmHPN rope stopper ball.

Maximum rope diameter: 5 mm. 

Available in blue, red, green, black and white

KDK carbon tiller for Laser/ILCA.

Holt's cleats and base plate assembly for Laser/ILCA. Ready to be installed.

Laser/ILCA replica rudderblade, by Windesign

Optiparts telltales for dinghy sails (8 red and 8 green). Includes adhesive discs to fix the telltales to the sail.

Windesign Sailing boots for dinghy sailing made of 5 mm neoprene with molded sole. 

Windesign dinghy sailing shoes made of 3 mm neoprene. 

The traditional blow molded Optimist hand bailer. 

Holt's replica daggerboard stopper set for Laser/ILCA.

Protect your Laser or ILCA hull from being scratched. These Laser and ILCA wear plates prevent the traveler block from damaging the deck. 

Holt Grab Rail suitable for all Laser Performance and ILCA Dinghies

It has never been so easy to measure and adjust your Optimist mast rake before your training or regatta. Place the special hook in the top-aft of the mast and measure the distance to the edge of the deck. The blade shows imperial units (inches) and metric units (centimeters).

Protect your Optimist hull from being scratched with this Optiparts UV resistant bottom cover.

Made of 320 gsm 600D solution dyed polyester with EVA backing, high quality 190T inner lining and closed cell foam in between.

Solution dyed polyester has much better color fastness and UV resistant characteristics than cheaper pigment dyed polyester. 

A heavy duty Dyneema® scissors. Ideal to cut your lines for splicing.

Cuts: Dyneema®, Vectran®, Spectra® and Kevlar®

Holt Laser/ILCA Replacement Bailer Bung.

Holt/Nautos 27 mm small stainless steel eye.

• Line size: 2 - 7 mm
• Hole centres: 27 mm
• Fixing size: M4

Black anodized Optiparts aluminium tiller extension with a releasable rubber joint and a black end knob which makes the tiller extension super smooth.

Designed to maximum allowed length.

• Length: 65 cm.
• Diameter: 16 mm.
• Weight: 115 g.

Holt´s replica ball bearing block for the Laser/ILCA mainsheet.

Holt´s replica ball bearing block with becket for the Laser/ILCA mainsheet.

Gold trim strip as used on the Optiparts Blackgold booms.

Text printed on transparent polyester. Length 16 cm.

Windesign replica daggerboard suitable for Laser/ILCA.

Windesign fully detachable hiking bench, with adjustable hiking strap and two padded supports.

Perfect for that extra training session. Convenient, portable and quick to assemble due to the quick link detachable joint design. Super strong but weighs just 5.7 kg. Designed by Laser sailors.

Size: 125 x 75 cm

This wind indicator from Windesign Sailing has a stronger vane-arm which is accurately balanced and performs amazing sensitive.

Optiparts heavy duty Optimist rig bag from 600 polyester with two compartments.

One for the sail and boom, and one for the Optimist mast and sprit. With zip closure, name tag pocket and detachable and adjustable carrying strap. With 2 straps for bundling to create a compact package.

Windesign junior hiking pants.

Made of very strong and durable 600D polyester. Each leg part has stiff polyester battens covered in closed cell foam to spread the pressure of the edge of the boat. The leg straps, two on each leg, have velcro closures and elastic sections to increase general comfort.

Windesign ergonomical designed kneepads with durable Kevlar® protection and a flexible neoprene padding.

It’s recommended to wear kneepads in Optimists and other dinghies. Not only to protect your own knees, also to protect the knee panels of your wetsuit. The Windesign kneepads are fitted with a double secured velcro fastening which ensures that lines will not stuck behind the velcro.

Windesign socks made of 2mm neoprene which are comfortable and warm.

These socks come with a pull strap to put them on more easily. 

DevotiKDK Structured Cap, a high-quality piece that combines style and functionality.

Available in two colors: white and black, this cap is designed to stand out on any occasion. It features a durable structure that maintains its shape over time. Whether you're on the deck of a boat or enjoying a sunny day in the city, this cap will provide you with the comfort and style you seek.

One size fits all.

The lightweight alternative to a block, with no moving parts these are an extremely low maintainance item.

Windesign's rings are hard anodized with PTFE coating to provide the smoothest wear resistant surface possible.

To see the size chart, please check the description below.

Neo-Skin Top made with W-Flex technology which consists of three layers to provide the best combination in durability, stretch and comfort. On the inner front and rear panel we used Polar fabric for extra comfort and warmth to your skin.

Features

• 2.5 mm Neo-Skin fabric
• Polar inner lining
• Soft smooth neoprene waist
• Soft touch glideskin neck
• W-Flex technology
• Flatlock stitching
• High quality stitched wrist seals

Sizes: JS, JM, JL, JXL, S, M, L. XL (see table in the description)

The first book with over 75 specific exercises organized by category and difficulty to serve as a guideline and inspiration for coaches and trainers at clubs. The book Written by Pim Stumpel & Ben Koppelaar both award winning Dutch dinghy coaches. Pim & Ben have written down all the exercises they use to train and coach sailors. With the support of Huub Lambriex (1984 Olympic Tornado sailor and mental coach) they have created tools to help coaches, program-managers and sailors set goals and structurally train to become better sailors.

Language: English

Optimist racing coach Attila Hodacs reveals 20 years of his coaching experience in this 85 page book. Topics included: The phases of development, how to lead optimist sailors to international level racing, setting up training sessions with different exercises, how to improve boathandling skills, strategy and how to minimize mistakes.

A must have for every trainer, coach or interested parent.

The 130-page history, illustrated by almost as many photos mostly in colour, tells the story of how an ‘Orange Crate’ from Florida became the junior boat in over 120 countries.

It includes an 18-page supplement by Clifford McKay Jr., the first boy to sail the Optimist, with some fabulous photos of the early days. The story is taken up by Robert Wilkes who worked with the Optimist Class for over 35 years and had access to it’s archives. Young people tend to ask why things are the way they are. This history gives the answer for their beloved little boat..

Written by Robert Wilkes and Clifford McKay Jr.

All-weather notebook with top spiral binding. 

A must-have for all coaches and outdoor people. Your text does not disappear, even when wet.

Size: 10 x 15 cm, 100 squared pages

Ideal for accurately depicting races, enforcing and teaching the racing rules, as well as for protests. It helps coaches to explain manoeuvres, trim, wind and tactics. For sailing clubs, committees, sailors and coaches. You can use your whiteboard marker (not included) for additional illustrations.

The whiteboard is supplied with a shock cord hand strap to make your coaching sessions even easier.

The whiteboard comes in a splashproof zip lock document bag which has a firm pull cord to make it easier to open and close. The bag is big enough to fit your whiteboard marker, magnetic sets and important documents.

Size: 35 x 25 cm

This magnetic boat set is ideal for accurately displaying dinghy races, enforcing and teaching the racing rules, as well as for protests. For sailing clubs, committees, sailors and coaches to use on a whiteboard.

This pack comes in a handy zip lock, plastic bag, small enough to be carried around everywhere, and contains:

• Three boats in various colors
• One coach boat
• Four racing marks
• One wind arrow
• One current arrow

Boat length: 10 cm

Package size: 12 x 12 cm

Windesign gloves, suitable for dinghy and cruise sailing.

Features

• Amara grip panel
• UV50+ Protection
• Comfortable knuckle panel
• Velcro secured wrist
• Comfortable stretch fabric
• Quick dry fabric
• Easy pull on strap

See size chart below

The personalizable 80 mm long vane float prevents loosing your wind indicator. Just slide the vane float easily on the wind indicator needle and the wind indicator will float when it comes in the water.

38 mm Windesign low friction ring spliced with Dyneema to a safety snap shackle. An extra loop is added below the ring for an easy switch between 1:2 and 1:3 mainsheet.

This releasable rubber joint for 16 mm tiller extension is mounted with an aluminium pin only. The rope core will avoid complete failure should the rubber tear.

Mounted with pin which is kept in place by a piece of heat shrinkable tubing. The distance between the mounting hole centres of all joints is 32 mm.

To remove a joint: simply cut off the tubing and push the pin out.

Optimist sprit ends for 27mm racing sprits. Sold in pairs.

Holt/Nautos block stand up base. Available in three different sizes. 

(please see chart below)

Holt/Nautos XR1 clutch with XTREME RELEASE function, designed to facilitate rope release under load.

• Rope Diameter: 6 to 12 mm
• Distance between holes: 79 mm
• Working Load: 550 Kg.

Please refer to the attached file in the 'Technical Data Sheet' section below for more information.

Holt/Nautos XR1 clutch with XTREME RELEASE function, designed to facilitate rope release under load.

• Rope Diameter: 6 to 12 mm
• Distance between holes: 79 mm
• Working Load: 550 Kg.

Please refer to the attached file in the 'Technical Data Sheet' section below for more information.

Holt/Nautos XR1 clutch with XTREME RELEASE function, designed to facilitate rope release under load.

• Rope Diameter: 6 to 12 mm
• Distance between holes: 79 mm
• Working Load: 550 Kg.

Please refer to the attached file in the 'Technical Data Sheet' section below for more information.

Holt/Nautos XR1 clutch with XTREME RELEASE function, designed to facilitate rope release under load.

• Rope Diameter: 6 to 12 mm
• Distance between holes: 79 mm
• Working Load: 550 Kg.

Please refer to the attached file in the 'Technical Data Sheet' section below for more information.

Holt/Nautos XR2 clutch with XTREME RELEASE function, designed to facilitate rope release under load.

• Rope Diameter: 10 to 16 mm
• Distance between fixing holes: 70 mm
• Working Load: 700 Kg.

Please refer to the attached file in the 'Technical Data Sheet' section below for more information.

Holt/Nautos standard mainsheet jammer, ideal for mainsheet systems.

• Maximum working load: 400 Kg.
• Distance between fixing holes: 20 mm.
• Fixing holes diameter: 5 mm.
• Weight: 360 grams. 
• Block not included

Holt/Nautos standard mainsheet jammer, ideal for mainsheet systems.

• Maximum working load: 400 Kg.
• Distance between fixing holes: 20 mm.
• Fixing holes diameter: 5 mm.
• Weight: 360 grams. 
• Block not included

Holt splicing needles set.

Includes

• 4mm needle - 1 pc
• 5.5mm needle - 1 pc

Holt splicing needle

Nautos/Holt double deck organizer.

For dimensions and additional technical information, please check the "Datasheet" tab below.

Nautos/Holt triple deck organizer.

For dimensions and additional technical information, please check the "Datasheet" tab below.

Nautos/Holt triple deck organizer.

For dimensions and additional technical information, please check the "Datasheet" tab below.

Holt/Nautos XR2 double clutch with XTREME RELEASE function, designed to facilitate rope release under load.

• Rope Diameter: 10 to 16 mm
• Distance between fixing holes: 70 mm
• Working Load: 700 Kg.

Please refer to the attached file in the 'Technical Data Sheet' section below for more information.

Holt/Nautos XR2 triple clutch with XTREME RELEASE function, designed to facilitate rope release under load.

• Rope Diameter: 10 to 16 mm
• Distance between fixing holes: 70 mm
• Working Load: 700 Kg.

Please refer to the attached file in the 'Technical Data Sheet' section below for more information.

Holt/Nautos XR2 quadruple clutch with XTREME RELEASE function, designed to facilitate rope release under load.

• Rope Diameter: 10 to 16 mm
• Distance between fixing holes: 70 mm
• Working Load: 700 Kg.

Please refer to the attached file in the 'Technical Data Sheet' section below for more information.

Holt/Nautos 38 mm aluminum cam cleat. 

• Line size: 5 - 12 mm
• Hole centres: 38 mm
• Fixing size: M5

Advanced metal replacement resin. Greater resistance to heat and UV stable. Lighter and stronger. Improved Jaw profle and vertical pillar design. Stronger and easier to release

Holt stainless steel spring

Holt/Nautos 30mm Dynamic Ball Snatch Block.

Ideal for use on twinning Lines, sheet tidy, continuous furlers and code zero take ups

Holt/Nautos Plain 45mm violin swivel With cleat and becket.

High tensile carbon composite body. Strong and lightweight. Locking tri-rivet head maintains sheave rotation under higher loads.

Ideal for use on: mainsheet systems, control Lines, sheet blocks, vang cascades, cunningham systems and halyard leads.

Set of 10 Monel rivets with mandrel made of galvanized steel.

Monel blind rivets are particularly suitable for applications in steel and aluminium materials, since the small potential difference results in a good resistance to galvanic corrosion (better than stainless steel).

Monel is a nickel-copper alloy with high tensile strength, which is very resistant to atmospheric corrosion and sea water. We supply open and closed type Monel rivets. Closed rivets provide an airtight seal.

Optiparts aluminium top pins for Optimist mast, strong and long lasting. Gold anodized.