Windesign replica daggerboard suitable for Laser/ILCA.

Windesign fully detachable hiking bench, with adjustable hiking strap and two padded supports.

Perfect for that extra training session. Convenient, portable and quick to assemble due to the quick link detachable joint design. Super strong but weighs just 5.7 kg. Designed by Laser sailors.

Size: 125 x 75 cm

This wind indicator from Windesign Sailing has a stronger vane-arm which is accurately balanced and performs amazing sensitive.

Windesign junior hiking pants.

Made of very strong and durable 600D polyester. Each leg part has stiff polyester battens covered in closed cell foam to spread the pressure of the edge of the boat. The leg straps, two on each leg, have velcro closures and elastic sections to increase general comfort.

Windesign ergonomical designed kneepads with durable Kevlar® protection and a flexible neoprene padding.

It’s recommended to wear kneepads in Optimists and other dinghies. Not only to protect your own knees, also to protect the knee panels of your wetsuit. The Windesign kneepads are fitted with a double secured velcro fastening which ensures that lines will not stuck behind the velcro.

Windesign socks made of 2mm neoprene which are comfortable and warm.

These socks come with a pull strap to put them on more easily. 

The lightweight alternative to a block, with no moving parts these are an extremely low maintainance item.

Windesign's rings are hard anodized with PTFE coating to provide the smoothest wear resistant surface possible.

To see the size chart, please check the description below.

Neo-Skin Top made with W-Flex technology which consists of three layers to provide the best combination in durability, stretch and comfort. On the inner front and rear panel we used Polar fabric for extra comfort and warmth to your skin.

Features

• 2.5 mm Neo-Skin fabric
• Polar inner lining
• Soft smooth neoprene waist
• Soft touch glideskin neck
• W-Flex technology
• Flatlock stitching
• High quality stitched wrist seals

Sizes: JS, JM, JL, JXL, S, M, L. XL (see table in the description)

All-weather notebook with top spiral binding. 

A must-have for all coaches and outdoor people. Your text does not disappear, even when wet.

Size: 10 x 15 cm, 100 squared pages

Ideal for accurately depicting races, enforcing and teaching the racing rules, as well as for protests. It helps coaches to explain manoeuvres, trim, wind and tactics. For sailing clubs, committees, sailors and coaches. You can use your whiteboard marker (not included) for additional illustrations.

The whiteboard is supplied with a shock cord hand strap to make your coaching sessions even easier.

The whiteboard comes in a splashproof zip lock document bag which has a firm pull cord to make it easier to open and close. The bag is big enough to fit your whiteboard marker, magnetic sets and important documents.

Size: 35 x 25 cm

This magnetic boat set is ideal for accurately displaying dinghy races, enforcing and teaching the racing rules, as well as for protests. For sailing clubs, committees, sailors and coaches to use on a whiteboard.

This pack comes in a handy zip lock, plastic bag, small enough to be carried around everywhere, and contains:

• Three boats in various colors
• One coach boat
• Four racing marks
• One wind arrow
• One current arrow

Boat length: 10 cm

Package size: 12 x 12 cm

Windesign gloves, suitable for dinghy and cruise sailing.

Features

• Amara grip panel
• UV50+ Protection
• Comfortable knuckle panel
• Velcro secured wrist
• Comfortable stretch fabric
• Quick dry fabric
• Easy pull on strap

See size chart below

The personalizable 80 mm long vane float prevents loosing your wind indicator. Just slide the vane float easily on the wind indicator needle and the wind indicator will float when it comes in the water.

38 mm Windesign low friction ring spliced with Dyneema to a safety snap shackle. An extra loop is added below the ring for an easy switch between 1:2 and 1:3 mainsheet.

Set of 10 Monel rivets with mandrel made of galvanized steel.

Monel blind rivets are particularly suitable for applications in steel and aluminium materials, since the small potential difference results in a good resistance to galvanic corrosion (better than stainless steel).

Monel is a nickel-copper alloy with high tensile strength, which is very resistant to atmospheric corrosion and sea water. We supply open and closed type Monel rivets. Closed rivets provide an airtight seal.

Optiparts aluminium top pins for Optimist mast, strong and long lasting. Gold anodized.

Optiparts top pins for Optimist mast, which do not cut the lines, as supplied with racing masts. Set of 2.

Briefcase of PX10 sailcloth to hold a laptop or papers.

Pockets for wallet, phone and pencils.

Size: 40 x 30 x 5 cm

Features

• PX10 sailcloth
• Four zipped compartments
• Compartment for laptop or tablet
• Internal accessory pockets

Fluor yellow lacing lines for Optimist mast and boom.

• Core: Vectran
• Cover: HT polyester

Five pieces 2.2 mm (45 cm) Optimist tack lines

Fourteen pieces 1.2 mm (42 cm) Optimist lacing lines

Stainless steel shackle key, suitable to screw pin and slotted head shackles. 8, 10, 13 mm open end spanner and bottle opener.

The shackle key is 10 cm long.

4 mm stainless stell shackle.

5 mm stainless stell shackle.

This Optimist magnetic boat set is ideal for accurately displaying dinghy races, enforcing and teaching the racing rules, as well as for protests. For sailing clubs, committees, sailors and coaches to use on a whiteboard.

This pack comes in a handy zip lock, plastic bag, small enough to be carried around everywhere, and contains:

• Three boats in various colors
• One coach boat
• Four racing marks
• One wind arrow
• One current arrow

Boat length: 5 cm

Package size: 12 x 12 cm

Junior Long John made with W-Flex technology which consists of three layers to provide the best combination of durability, stretch and comfort. This Junior Long John comes with a horizontal pee zipper.

Features

• 3 mm Neo-Skin fabric
• Velcro shoulder strap
• Horizontal pee zipper
• W-Flex technology
• Flatlock stitching
• Reinforced in knees and seat
• High quality stitched leg seals

Sizes: JS, JM, JL, JXL (see table in the description)

Waxed whipping twine, useful for finishing the ends of rope or for adding a stitch to the join in spliced ropes.

0.8mm diameter with approx. 50m on a roll - priced per roll.

Laser/ILCA replica boom with blocks, by Windesign. 

Laser/ILCA replica aluminum top mast by Windesign. 

Stainless steel flat shackle.

Stainless steel flat shackle.

Windesign replica block plate with 20mm ball bearing blocks for Laser/ILCA.

Very strong alloy cleat, hard anodized. Used as Laser/ILCA outhaul and traveler cleat.

• Line diameter: 3 – 6 mm
• Hole centres: 66 mm
• Length: 82 mm
• Width: 18 mm
• Height: 23 mm
• Bolt size: M5
• Screw size: 4.8
• Weight: 34 gms

Clamcleat CL218 Mk1 with side entry fairlead.

The side entry fairlead allows ropes to be hooked in for cleating, yet easily removed. Ideal as a reaching hook.

Lacing lines for Optimist mast and boom.

• Core: Vectran
• Cover: HT polyester

Five pieces 2.2 mm (45 cm) Optimist tack lines

Fourteen pieces 1.2 mm (42 cm) Optimist lacing lines

Lightweight aluminium trolley for the Laser Pico.

Spring locking quick release of all parts allows the trolley to be disassembled in a matter of seconds for storage and travel. The frame has welded joints and is anodized to prevent corrosion. This trolley is supplied with 8 mm stainless steel push button wheel locks which are mounted inside the stainless steel axles. Supplied with the large Durastar-lite puncture proof wheels, v-supports, side supports and heavy duty 90 mm wide polyester webbing belt.

The lightweight dinghy trolleys from Windesign are designed to be the most functional available. With multiple length sections and 3 different angle connectors we can create a trolley for almost every dinghy.

Mainsail and jib set for Laser Pico.

This set consists of a mainsail and jib made out of 4 OZ blue Dacron sailcloth. The jib incorporates a 3mm stainless steel forestay. Comes with a sailbag.

Tapered sail battens for the Laser Standard MK2 and ILCA 7.

Sizes:

• 1 x 75 cm
• 1 x 60 cm
• 1 x 40 cm