Active filters

  • Brand: Allen Brothers
  • Brand: Harken
  • Brand: ILCA
  • Brand: Optiparts

Brand: Optiparts

€10.75

Large, lightweight and durable handbailers. The wide ergonomic base creates more bailing capacity with each stroke, the curved bottom to follow the bailing motion and a triangular top so you don’t stuck behind the gunwale. High handle with end stop to prevent slipping out of your hand, with integrated shockcord fastening. Reinforced wear areas, rounded front lip and stackable for transportation.

Length 24 cm, width 17 cm

Brand: Optiparts

€210.00

This Optimist Silver regatta mast is less stiff than Blackgold spars and is ideal for lightweight Optimist sailors who just started racing.

It’s made of high quality aluminium tube and fitted with:

  • Aluminium halyard and downhaul Clamcleats EX1381
  • Stainless steel hook-in block backing plate Plain bearing hook-in block EX1340
  • Plain bearing 19 mm halyard block EX1332
  • Low friction wind indicator EX1243
  • Set of nylon top pins EX1338
  • Pin stop EX13372
  • Blue measurement band sticker EX1333B
  • 4 mm 2:1 polyester halyard

Brand: Optiparts

€135.00

The lightweight 40 mm Optimist SILVER regatta boom from Optiparts is much stiffer than the 32mm school boom and will allow the Optimist sailor to put more tension on the leach.

Fitted with:

  • Blue nylon V-cleat EX1405B
  • Pin stops EX13373
  • Red trimstrip EX1358R
  • 4 mm polyester outhaul
  • 3 mm Vectran bridle with ring
  • 3 mm Vectran boom preventer
  • 3 mm spliced Dyneema / 6 mm polyester vang

Brand: Optiparts

€17.95

PRO Daggerboard insert for Optimist.

This package includes 2 PRO front daggerboard inserts, 2 PRO back daggerboard inserts, made of wear resistant TPU rubber and comes with glue and sandpaper.

The PRO daggerboard inserts offer advantages over the EX1116; non-slip edges for improved grip within the daggerboard case, a pre-shaped contour to simplify positioning of the daggerboard and a sloping top design to prevent losing the inserts.

Brand: Optiparts

€189.95

Protect your Optimist hull from being scratched with this Optiparts UV resistant bottom cover.

Made of 320 gsm 600D solution dyed polyester with EVA backing, high quality 190T inner lining and closed cell foam in between.

Solution dyed polyester has much better color fastness and UV resistant characteristics than cheaper pigment dyed polyester. 

Brand: Optiparts

€43.95

The first book with over 75 specific exercises organized by category and difficulty to serve as a guideline and inspiration for coaches and trainers at clubs. The book Written by Pim Stumpel & Ben Koppelaar both award winning Dutch dinghy coaches. Pim & Ben have written down all the exercises they use to train and coach sailors. With the support of Huub Lambriex (1984 Olympic Tornado sailor and mental coach) they have created tools to help coaches, program-managers and sailors set goals and structurally train to become better sailors.

Language: English

Brand: Optiparts

€34.95

Optimist racing coach Attila Hodacs reveals 20 years of his coaching experience in this 85 page book. Topics included: The phases of development, how to lead optimist sailors to international level racing, setting up training sessions with different exercises, how to improve boathandling skills, strategy and how to minimize mistakes.

A must have for every trainer, coach or interested parent.

Brand: Optiparts

€18.50

The 130-page history, illustrated by almost as many photos mostly in colour, tells the story of how an ‘Orange Crate’ from Florida became the junior boat in over 120 countries.

It includes an 18-page supplement by Clifford McKay Jr., the first boy to sail the Optimist, with some fabulous photos of the early days. The story is taken up by Robert Wilkes who worked with the Optimist Class for over 35 years and had access to it’s archives. Young people tend to ask why things are the way they are. This history gives the answer for their beloved little boat..

Written by Robert Wilkes and Clifford McKay Jr.

Brand: Optiparts

€10.95

This releasable rubber joint for 16 mm tiller extension is mounted with an aluminium pin only. The rope core will avoid complete failure should the rubber tear.

Mounted with pin which is kept in place by a piece of heat shrinkable tubing. The distance between the mounting hole centres of all joints is 32 mm.

To remove a joint: simply cut off the tubing and push the pin out.

Brand: Allen Brothers

€151.50

Allen Brothers Laser / ILCA Lower Vang Unit.

This Laser vang unit offers ultimate control over your vang control line. The cam cleat is mounted to a swivel, this ensures you can pull the vang control line from any angle and with minimal friction.

The block formation of our Laser / ILCA vang unit ensures the vang control line does not twist under load.

Easily attached to the Laser / ILCA mast tang with a nut and bolt.

Also featured is a removable clevis pin which can be used to dead-end the Cunningham control line.

This product is ILCA and Laser class legal.

Brand: Allen Brothers

€95.10

Laser/ ILCA control line cam cleats with angled base, Pro-lead and wire under-fairleads.

The base has been optimised with a small angle to ensure the control lines can easily be adjusted when hiking and the Pro-lead ensures the rope guides easily into the mouth of the cam cleat from any angle.

This product is ILCA and Laser class legal.

Brand: Harken

€167.76

Harken Carbo One Touch Winch Handle.

Lightweight and fast-acting, the Carbo® OneTouch® ball bearing locking winch handle makes grinding winches easy!

Dimensions

  • A: 241 mm
  • B: 181 mm
  • C: 33 mm

Racers will maneuver faster and cruisers will have confidence in a reliable and easy-to-use winch handle. The Carbo OneTouch locks in and out of the winch using its patented locking mechanism and ergonomically-designed grab bar. It only takes one hand to set or release the handle—squeeze anywhere along the grab bar with your palm to unlock; release the bar for a secure lock. Harken added SpeedGrip handle technology to the OneTouch for fast and efficient winching.

Brand: Harken

€19.50

The 16 mm is Harken’s smallest block. It is perfect for small synthetic control lines found on high-tech dinghies.

The patented bearing system uses stainless steel balls in a captive grooved race and has a 250 lb (113 kg) maximum working load.

The 404 uses an O-ring to keep the line in the sheave during intermittent loading.