Optiparts' stainless steel mast lock to secure your Optimist masts from coming out of its step when the boat is capsized. 

Stainless steel push button wheel lock for the Optiparts Optimist trolleys.

Pin diameter: 8 mm

Laser/ILCA open ended fairlead. Ideal for the traveller system.

Holt's Laser/ILCA Vang Curved Kicker Key

A special edition 36 cm long lightweight, thick EVA foam grip.

This grip weighs only 26 grams.

A special edition 36 cm long lightweight, thick EVA foam grip.

This grip weighs only 26 grams.

Rig travel bag for Laser and ILCA.

Heavy duty mast bag from 600D polyester with 3 compartments for the Laser/ILCA bottom mast, top mast and boom. With zip closure, name tag pocket and detachable and adjustable carrying strap. Can be bundled with 2 straps to create a compact package. Sail can be stored rolled around the top mast.

Windesign Laser 4.7 / ILCA 4 Training Sail. Batten set not included.

Windesign Laser Radial / ILCA 6 Training Sail. Batten set not included.

Always carry a whistle with you during your sailing session. This pea-less nautical whistle comes with lanyard and has a clip for easy attachment.

It’s flat so it fits easily in your buoyancy aid front pocket.

Windesign replica batten set. 

Suitable for:

• Laser 4.7
• Laser Radial
• Laser Standard Mk1
• ILCA 4
• ILCA 6

Two 60 cm battens + one 40 cm batten

Fully detachable Optimist hiking bench.

With adjustable hiking strap. Padded support. Perfect for that extra Optimist training session. Convenient portable and quick to assemble due to the quick link detachable joint design. 

Windesign replica Mk2 batten set. 

Suitable for:

• Laser Standard Mk2
• ILCA 7

One 75 cm batten + one 60 cm batten + one 40 cm batten

Red rhombus sail logo, 24 cm. 

Flexible rubber key ring with Optimist class logo.

8 cm high. Available in blue, green and red.

Optimist school sail made of strong 3.8 oz. high quality 100% dacron sailcloth. Six panels with nickel plated eyes.

Heavily reinforced corners and untapered battens. This sail comes folded, but is supplied with a long sail bag to store the sail rolled including spars.

Without window, class logo and IODA sail button.

Durarace Sails from Windesign are built for durability and speed! Made of 4.18 Challenge sailcloth. A bit more heavy but much more duarable than sailcloth used in most racing sails.

Easy to trim 6 panel horizontal designs, with tapered sailbattens, IODA button, telltales and window installed. It comes rolled in a long sail bag.

The Windesign Durarace LITE sail is suitable for sailors under 45 kg. (99 lbs).

Optiparts aluminium optimist tiller.

Two rectangular aluminium tubes mounted together. Plastic end caps. 

Aluminium Optimist tiller (EX1120) with standard aluminium tiller extension EX1142 (joint without rope core).

All silver anodized.

Clip for wind indicators with a 5 mm shaft.

Small stainless steel safety snap shackle for the Optimist mainsheet. Also suitable for other classes

Lengt: 34 mm

Weight: 16 g

Boom bridle for Optimist, 3 mm Dyneema with stainless steel ring for mainsheet.

This mast sleeve is fitted around the mast at deck level and protects the mast from wearing. Optimist mast sleeve as supplied with Blackgold masts.

Official ILCA 4 & 7 lower section base plug.

Class legal part for ILCA (International Laser Class Association) events. Compatible with Laser.

Large, lightweight and durable handbailers. The wide ergonomic base creates more bailing capacity with each stroke, the curved bottom to follow the bailing motion and a triangular top so you don’t stuck behind the gunwale. High handle with end stop to prevent slipping out of your hand, with integrated shockcord fastening. Reinforced wear areas, rounded front lip and stackable for transportation.

Length 24 cm, width 17 cm

Windesign economy bottom cover for the Laser and ILCA.

Made of 600D PU coated polyester. The bottom cover webbing loops are installed to be able to pull the cover tight around the hull during transport.

Color: light grey

Sail numbers for Optimist, Laser 4-7 and ILCA 4 sails, and other classes.

• Size: 23,5 cm.
• Available colors: black, blue and red.

Windesign top mast bag for Laser and ILCA.

Heavy duty mast bag from 600D polyester. With buckle closure, name tag and carrying handle.

Ideal for your Laser/ILCA carbon top mast.

Optiparts´rudder retaining clip for Optimist rudder blades up to 15 mm thick.

The only perfect rudder retaining clip for the Optimist rudder blade.

This Optimist Silver regatta mast is less stiff than Blackgold spars and is ideal for lightweight Optimist sailors who just started racing.

It’s made of high quality aluminium tube and fitted with:

• Aluminium halyard and downhaul Clamcleats EX1381
• Stainless steel hook-in block backing plate Plain bearing hook-in block EX1340
• Plain bearing 19 mm halyard block EX1332
• Low friction wind indicator EX1243
• Set of nylon top pins EX1338
• Pin stop EX13372
• Blue measurement band sticker EX1333B
• 4 mm 2:1 polyester halyard

Optiparts school mast.

The most basic mast in the range, ideal for schools and sailing club fleets. Fitted with stainless steel halyard and downhaul cleat.

The Optimist Upgraded school mast from Optiparts is fitted with a stainless steel halyard block, aluminium Clamcleats, a nylon pin stop and two stainless steel eyes for fixing the head of the sail.

The 40 mm Optimist school boom has nylon in- and outboard end fittings, a nylon outhaul cleat and nylon fittings for mainsheet and downhaul attachment.

The lightweight 40 mm Optimist SILVER regatta boom from Optiparts is much stiffer than the 32mm school boom and will allow the Optimist sailor to put more tension on the leach.

Fitted with:

• Blue nylon V-cleat EX1405B
• Pin stops EX13373
• Red trimstrip EX1358R
• 4 mm polyester outhaul
• 3 mm Vectran bridle with ring
• 3 mm Vectran boom preventer
• 3 mm spliced Dyneema / 6 mm polyester vang

The 32 mm Optimist SCHOOL boom has nylon in- and outboard end fittings, a nylon outhaul cleat and nylon fittings for mainsheet and downhaul attachment.

25 mm diameter school sprit by Optiparts. 

Has no chafe protection tube. Idea for sailing schools and clubs fleets. 

The 27 mm Optimist Silver regatta sprit has 15 cm anti chafe protection tubing.

The Optimist Uograded school sprit from Optiparts has blue sprit ends and 15 cm black tubing for protecting damage between the Optimist mast and the sprit.

Outboard end for 45mm racing boom (for EX945). All boom end fittings are made of high quality glass fibre filled nylon. Diameters given are outside tube diameters.

Set of two Optimist Class logo for sails, in blue colour. 

8-meter glide tape roll for the Optimist daggerboard.

Approximately 2 meters of this tape are needed for an Optimist.

GRP polyester Optimist school daggerboard from Optiparts. For Optimist training and school use only.

The perfect Optimist rudder blade for Optimist training and school use.

Solid puncture and temperature proof wheel.

Diameter: 26 cm

Suitable for 25 (1″) x 75 mm axles

Large Optiflex-lite puncture proof wheels for Optiparts Optimist trolleys, with a diameter of 37cm.

The Optiflex-lite trolley wheels are the ultimate in wheel design. They are ultra light; the weight is only 1750 grams. Suitable for 25 (1″) x 75 mm axles

Replacement vane for the Windesign wind indicators EX1243 and EX2021.

Optiparts Pro padded Optimist hiking strap, made of strong polyester webbing and partly covered with wear resistant cloth that is perfectly UV resistant.

Mini reel 1.2mm Vectran line black with gold fleck. Suitable Optimist ties.

Optiparts Doppio 20 mm black anodized aluminium 60 cm tiller extension for the Optimist. 

• Length: 60 cm.
• Diameter: 20 mm.
• Weight: 150 g.

Round button spring locking system for the Optiparts Optimist trolleys and Windesign dinghy trolleys.

Optiparts black 20 mm black anodized aluminium 60 cm tiller extension for the Optimist. 

• Length: 60 cm.
• Diameter: 20 mm.
• Weight: 150 g.

Mini reel 1.2mm Vectran line black with gold fleck. Suitable Optimist ties.

Mini reel 2.2mm Vectran line black with gold fleck. Suitable Optimist corner ties, fluor yellow

PRO Daggerboard insert for Optimist.

This package includes 2 PRO front daggerboard inserts, 2 PRO back daggerboard inserts, made of wear resistant TPU rubber and comes with glue and sandpaper.

The PRO daggerboard inserts offer advantages over the EX1116; non-slip edges for improved grip within the daggerboard case, a pre-shaped contour to simplify positioning of the daggerboard and a sloping top design to prevent losing the inserts.

Gorilla Sailing fully padded Optimist Combi foil bag.

Laser/ILCA replica rudderblade, by Windesign

Optiparts telltales for dinghy sails (8 red and 8 green). Includes adhesive discs to fix the telltales to the sail.