ILCA / Laser

Compact and extremely strong blocks. Ultra lightweight for mainsheets and control lines.

Stainless steel double pad eye for Laser outhaul and cunningham upgrade. Supplied with 29mm ball bearing Harken blocks. 

Set of 2 high quality extra long load straps with protection behind the buckle

Set of 2 high quality extra long load straps with protection behind the buckle

Top quality, long-life topcover for Laser and ILCA, made of Moistureguard 2000.

This light grey economy top cover is made of strong and flexible solution dyed PVC coated polyester, which is water resistant and offers a good UV protection.

Heavy duty pivot bolt for Laser/ILCA rudder.

Laser/ILCA rudder gudgeon.

Windesign Laser Radial / ILCA 6 Training Sail. Batten set not included.

Harken model 2135 57mm ratchet block, used as Optimist mainsheet block with 2-way link.

Compact and extremely strong blocks. Ultra lightweight for mainsheets and control lines. These blocks can be used as becket blocks too.

This wind indicator from Windesign Sailing has a stronger vane-arm which is accurately balanced and performs amazing sensitive.

This wind indicator from Windesign Sailing has a stronger vane-arm which is accurately balanced and performs amazing sensitive.

Extra stiff, 10 cm wide Windesign PRO padded Laser/ILCA hiking strap. 

Windesign's heavily padded foil bag for Laser and ILCA.

Nut for mounting traveler eyelet fairlead for Laser.

Laser Mast Wear Kit contains two stripes of UHMWPE with acrylic adhesive on liner to be applied on the mast boot and mast collar complete to reduce the wear and tear of the gelcoat. 

Two stripes of 21 mm of width and 200 mm in length.

Harken 18mm Fly-Soft block, ideal to be used on outhaul or downhaul systems for Laser/ILCA. Also suitable for other classes.

Laser/ILCA replica rudderblade, by Windesign

Harken 40mm carbo ratchet block, used as Optimist mainsheet block and Laser mainsheet block.

Harken ball bearing cam cleats, 38 mm fastener spacing. Ideal for racing dinghies.

ILCA Class Legal cleat plate complete, with Harken cleats.

Protect your Laser or ILCA hull from being scratched. These Laser and ILCA wear plates prevent the traveler block from damaging the deck. 

A heavy duty Dyneema® scissors. Ideal to cut your lines for splicing.

Cuts: Dyneema®, Vectran®, Spectra® and Kevlar®

Rig travel bag for Laser and ILCA.

Heavy duty mast bag from 600D polyester with 3 compartments for the Laser/ILCA bottom mast, top mast and boom. With zip closure, name tag pocket and detachable and adjustable carrying strap. Can be bundled with 2 straps to create a compact package. Sail can be stored rolled around the top mast.

Windesign Laser 4.7 / ILCA 4 Training Sail. Batten set not included.

Windesign Laser Radial / ILCA 6 Training Sail. Batten set not included.

Windesign replica batten set. 

Suitable for:

• Laser 4.7
• Laser Radial
• Laser Standard Mk1
• ILCA 4
• ILCA 6

Two 60 cm battens + one 40 cm batten

Windesign replica Mk2 batten set. 

Suitable for:

• Laser Standard Mk2
• ILCA 7

One 75 cm batten + one 60 cm batten + one 40 cm batten

Red rhombus sail logo, 24 cm. 

Windesign replica daggerboard suitable for Laser/ILCA.

Replacement vane for the Windesign wind indicators EX1243 and EX2021.

Windesign economy bottom cover for the Laser and ILCA.

Made of 600D PU coated polyester. The bottom cover webbing loops are installed to be able to pull the cover tight around the hull during transport.

Color: light grey

Windesign top mast bag for Laser and ILCA.

Heavy duty mast bag from 600D polyester. With buckle closure, name tag and carrying handle.

Ideal for your Laser/ILCA carbon top mast.

Windesign fully detachable hiking bench, with adjustable hiking strap and two padded supports.

Perfect for that extra training session. Convenient, portable and quick to assemble due to the quick link detachable joint design. Super strong but weighs just 5.7 kg. Designed by Laser sailors.

Size: 125 x 75 cm

The personalizable 80 mm long vane float prevents loosing your wind indicator. Just slide the vane float easily on the wind indicator needle and the wind indicator will float when it comes in the water.

Hard anodised CL270AN Micro Clamcleat.

The side entry fairlead allows ropes to be hooked in for cleating, yet easily removed. Small, neat and lightweight. Advanced tooth technology to hold all types of small rope. Integral becket allows riggging with a 2:1 ratio, without extra parts. Applications include Canoes & Kayaks (seat & rudder lines); Dinghy tiller lines. Manufactured from aluminium for light weight and durable performance.

The Clamcleat® CL277 is available in two finishes:

1. CL277 has a silver stove enamel finish for a cost effective, high quality coating.
2. CL277AN has a hard anodised finish to give a hard wearing surface.

CL278 is the Port version of this cleat. Using a CL823 Tapered Pad can aid rope alignment.

Harken 57mm carbo ratchet block with 1.5X grip, model 2166, used as Optimist mainsheet block and Laser mainsheet block.

Harken 40mm carbo block with swivel.

Stainless steel shackle key, suitable to screw pin and slotted head shackles. 8, 10, 13 mm open end spanner and bottle opener.

The shackle key is 10 cm long.

4 mm stainless stell shackle.

5 mm stainless stell shackle.

Laser/ILCA replica boom with blocks, by Windesign. 

Laser/ILCA replica aluminum top mast by Windesign. 

Windesign replica block plate with 20mm ball bearing blocks for Laser/ILCA.

The 16 mm is Harken’s smallest block. It is perfect for small synthetic control lines found on high-tech dinghies.

The patented bearing system uses stainless steel balls in a captive grooved race and has a 250 lb (113 kg) maximum working load.

The 404 uses an O-ring to keep the line in the sheave during intermittent loading.

Tapered sail battens for the Laser Standard MK2 and ILCA 7.

Sizes:

• 1 x 75 cm
• 1 x 60 cm
• 1 x 40 cm