ILCA / Laser

Allen Brothers' Dynamic 20mm Single Tie-On block. Suitable for the downhaul and outhaul systems of Laser/ILCA. 

First quality, high elasticity, natural rubber provides a minimum 100% stretch with constant elongation characteristics

Lightweight and high strength, single braid bio-based Dyneema SK78, with tough ArmourCoat finish

Low stretch and zero creep maintains sail set even when fully loaded over extended periods

The bio-based SK78 core is high strength and has minimal creep.

Ideal for Laser/ILCA outhaul, downhaul and vang systems.

The Technora blended cover gives the same fantastic abrasion and heat resistance properties as EXCEL ELITE. Technora blend cover adds grip for wet hands, and is easy to taper, showing colour matched ARMOURCOAT core.

Ideal for halyards, sheets and high strength control lines.

Light weight, high visibility floating line

Set of 2 high quality extra long load straps with protection behind the buckle

Set of 2 high quality extra long load straps with protection behind the buckle

Top quality, long-life topcover for Laser and ILCA, made of Moistureguard 2000.

This light grey economy top cover is made of strong and flexible solution dyed PVC coated polyester, which is water resistant and offers a good UV protection.

Heavy duty pivot bolt for Laser/ILCA rudder.

Laser/ILCA rudder gudgeon.

Windesign Laser Radial / ILCA 6 Training Sail. Batten set not included.

Low stretch, 100% Polyester rope offers great performance at a lower cost.

Marlow's High strength, lightweight with 100% Polyester cover and Dyneema® core for all round use on halyards, sheets and control lines.

This wind indicator from Windesign Sailing has a stronger vane-arm which is accurately balanced and performs amazing sensitive.

This wind indicator from Windesign Sailing has a stronger vane-arm which is accurately balanced and performs amazing sensitive.

Extra stiff, 10 cm wide Windesign PRO padded Laser/ILCA hiking strap. 

Windesign's heavily padded foil bag for Laser and ILCA.

Nut for mounting traveler eyelet fairlead for Laser.

Laser/ILCA replica rudderblade, by Windesign

Protect your Laser or ILCA hull from being scratched. These Laser and ILCA wear plates prevent the traveler block from damaging the deck. 

A heavy duty Dyneema® scissors. Ideal to cut your lines for splicing.

Cuts: Dyneema®, Vectran®, Spectra® and Kevlar®

Rig travel bag for Laser and ILCA.

Heavy duty mast bag from 600D polyester with 3 compartments for the Laser/ILCA bottom mast, top mast and boom. With zip closure, name tag pocket and detachable and adjustable carrying strap. Can be bundled with 2 straps to create a compact package. Sail can be stored rolled around the top mast.

Windesign Laser 4.7 / ILCA 4 Training Sail. Batten set not included.

Windesign Laser Radial / ILCA 6 Training Sail. Batten set not included.

Windesign replica batten set. 

Suitable for:

• Laser 4.7
• Laser Radial
• Laser Standard Mk1
• ILCA 4
• ILCA 6

Two 60 cm battens + one 40 cm batten

Windesign replica Mk2 batten set. 

Suitable for:

• Laser Standard Mk2
• ILCA 7

One 75 cm batten + one 60 cm batten + one 40 cm batten

Red rhombus sail logo, 24 cm. 

Windesign replica daggerboard suitable for Laser/ILCA.

Replacement vane for the Windesign wind indicators EX1243 and EX2021.

Windesign economy bottom cover for the Laser and ILCA.

Made of 600D PU coated polyester. The bottom cover webbing loops are installed to be able to pull the cover tight around the hull during transport.

Color: light grey

Windesign top mast bag for Laser and ILCA.

Heavy duty mast bag from 600D polyester. With buckle closure, name tag and carrying handle.

Ideal for your Laser/ILCA carbon top mast.

Windesign fully detachable hiking bench, with adjustable hiking strap and two padded supports.

Perfect for that extra training session. Convenient, portable and quick to assemble due to the quick link detachable joint design. Super strong but weighs just 5.7 kg. Designed by Laser sailors.

Size: 125 x 75 cm

The personalizable 80 mm long vane float prevents loosing your wind indicator. Just slide the vane float easily on the wind indicator needle and the wind indicator will float when it comes in the water.

Allen Brothers Laser / ILCA Lower Vang Unit.

This Laser vang unit offers ultimate control over your vang control line. The cam cleat is mounted to a swivel, this ensures you can pull the vang control line from any angle and with minimal friction.

The block formation of our Laser / ILCA vang unit ensures the vang control line does not twist under load.

Easily attached to the Laser / ILCA mast tang with a nut and bolt.

Also featured is a removable clevis pin which can be used to dead-end the Cunningham control line.

This product is ILCA and Laser class legal.

Laser/ ILCA control line cam cleats with angled base, Pro-lead and wire under-fairleads.

The base has been optimised with a small angle to ensure the control lines can easily be adjusted when hiking and the Pro-lead ensures the rope guides easily into the mouth of the cam cleat from any angle.

This product is ILCA and Laser class legal.

Hard anodised CL270AN Micro Clamcleat.

The side entry fairlead allows ropes to be hooked in for cleating, yet easily removed. Small, neat and lightweight. Advanced tooth technology to hold all types of small rope. Integral becket allows riggging with a 2:1 ratio, without extra parts. Applications include Canoes & Kayaks (seat & rudder lines); Dinghy tiller lines. Manufactured from aluminium for light weight and durable performance.

The Clamcleat® CL277 is available in two finishes:

1. CL277 has a silver stove enamel finish for a cost effective, high quality coating.
2. CL277AN has a hard anodised finish to give a hard wearing surface.

CL278 is the Port version of this cleat. Using a CL823 Tapered Pad can aid rope alignment.

Stainless steel shackle key, suitable to screw pin and slotted head shackles. 8, 10, 13 mm open end spanner and bottle opener.

The shackle key is 10 cm long.

4 mm stainless stell shackle.

5 mm stainless stell shackle.

Laser/ILCA replica boom with blocks, by Windesign. 

Laser/ILCA replica aluminum top mast by Windesign. 

Windesign replica block plate with 20mm ball bearing blocks for Laser/ILCA.

Tapered sail battens for the Laser Standard MK2 and ILCA 7.

Sizes:

• 1 x 75 cm
• 1 x 60 cm
• 1 x 40 cm