ILCA / Laser

KDK carbon tiller for Laser/ILCA.

Holt/Nautos replica self-bailer for Laser/ILCA.

Rooster's Polilite rope, ideal for mainsheet applications on racing dinghies.

Allen Brothers' Dynamic 20mm Single Tie-On block. Suitable for the downhaul and outhaul systems of Laser/ILCA. 

If you are looking for a glove suited to mainsheet trimming; where releasing the sheet is just as important as pulling in, the Dura Pro may be the answer. With double layer top quality abrasion resistant Amara on all high load/stress areas, these gloves are extremely supple with excellent grip and are perfect for all helming duties.

Ronstan Orbit 55 ratchet block, ideal for multiple applications, including dinghy mainsheet systems. 

Stand-up kits feature a clatter-free rubber boot. You can attach the Dyneema link so that the block is aligned with the stand-up base or across it. It's a neat, low-profile solution which allows full articulation.

The RF2455 stand-up kit features a clatter-free rubber boot. You can attach the Dyneema link so that the block is aligned with the stand-up base or across it. It’s a neat, low-profile solution which allows full articulation.

Ronstan Series 55 Ratchet Orbit, suitable for all racing dinghies. 

Holt´s universal flexible tiller joint

Set of 2 high quality extra long load straps with protection behind the buckle

Set of 2 high quality extra long load straps with protection behind the buckle

Top quality, long-life topcover for Laser and ILCA, made of Moistureguard 2000.

This light grey economy top cover is made of strong and flexible solution dyed PVC coated polyester, which is water resistant and offers a good UV protection.

Heavy duty pivot bolt for Laser/ILCA rudder.

Laser/ILCA rudder gudgeon.

Neoprene sleeve bottle holder with adjustable webbing straps at each end to fit around different circumferences of tube.

Rooster toestraps use a unique rubber compound that has a very high coefficient of friction, whilst also being light and durable.

Windesign Laser Radial / ILCA 6 Training Sail. Batten set not included.

Rooster's Polilite rope, ideal for Laser/ILCA. 14 meters in length.

These bailer spring plates are manufactured using the highest quality spring stainless steel, designed to both retract using spring tension, and at the same time providing a surface for the activator to push against to close the chute. 

This wind indicator from Windesign Sailing has a stronger vane-arm which is accurately balanced and performs amazing sensitive.

This wind indicator from Windesign Sailing has a stronger vane-arm which is accurately balanced and performs amazing sensitive.

Rooster Sailing foils bag suitable for Laser and ILCA

Extra stiff, 10 cm wide Windesign PRO padded Laser/ILCA hiking strap. 

Windesign's heavily padded foil bag for Laser and ILCA.

Rooster's 50mm clew strap suitable for Laser/ILCA.

Nut for mounting traveler eyelet fairlead for Laser.

Ready to sail Holt replica Laser/ILCA boom, fitted with ball bearing blocks.

Holt replica sail for Laser Radial or ILCA 6. Batten set no included

Rooster's Polilite rope, ideal for Laser/ILCA. 14 meters in length, 7 mm diameter

Holt's hiking strap for Laser/ILCA. Length of 870 mm. 

Holt's cleats and base plate assembly for Laser/ILCA. Ready to be installed.

Laser/ILCA replica rudderblade, by Windesign

Holt replica aluminum top mast for Laser/ILCA.

A pack of three green and three red self adhesive wool telltales (with TEFLON treatment) that don´t stick to the sail in the wet.

Protect your Laser or ILCA hull from being scratched. These Laser and ILCA wear plates prevent the traveler block from damaging the deck. 

Holt Grab Rail suitable for all Laser Performance and ILCA Dinghies

A heavy duty Dyneema® scissors. Ideal to cut your lines for splicing.

Cuts: Dyneema®, Vectran®, Spectra® and Kevlar®

Laser 4.7/ILCA 4 Replica Lower Mast produced by Holt. 

Laser Radial/ILCA 6 Replica Lower Mast produced by Holt. 

Rig travel bag for Laser and ILCA.

Heavy duty mast bag from 600D polyester with 3 compartments for the Laser/ILCA bottom mast, top mast and boom. With zip closure, name tag pocket and detachable and adjustable carrying strap. Can be bundled with 2 straps to create a compact package. Sail can be stored rolled around the top mast.

Rooster Sailing self adhesive grip tape for use on your deck.

Moulds to fit the surface applied to providing a strong connection and durable grip. When you want to remove it, it's easy and clean and does not leave any residue when peeled off.

Available in a number of colours.

• Width: 100 mm
• Length: 2 meters
• Thickness: 2.5 mm

Windesign Laser 4.7 / ILCA 4 Training Sail. Batten set not included.

Windesign Laser Radial / ILCA 6 Training Sail. Batten set not included.

Holt replica sail for Laser Standard or ILCA 7, horizontal cut. Batten set no included, folded.

Holt Mk2 replica sail for Laser Standard or ILCA 7. Batten set no included, delivered folded.

Windesign replica batten set. 

Suitable for:

• Laser 4.7
• Laser Radial
• Laser Standard Mk1
• ILCA 4
• ILCA 6

Two 60 cm battens + one 40 cm batten

Windesign replica Mk2 batten set. 

Suitable for:

• Laser Standard Mk2
• ILCA 7

One 75 cm batten + one 60 cm batten + one 40 cm batten

Red rhombus sail logo, 24 cm. 

Windesign replica daggerboard suitable for Laser/ILCA.

Replacement vane for the Windesign wind indicators EX1243 and EX2021.

Windesign economy bottom cover for the Laser and ILCA.

Made of 600D PU coated polyester. The bottom cover webbing loops are installed to be able to pull the cover tight around the hull during transport.

Color: light grey

Windesign top mast bag for Laser and ILCA.

Heavy duty mast bag from 600D polyester. With buckle closure, name tag and carrying handle.

Ideal for your Laser/ILCA carbon top mast.

Windesign fully detachable hiking bench, with adjustable hiking strap and two padded supports.

Perfect for that extra training session. Convenient, portable and quick to assemble due to the quick link detachable joint design. Super strong but weighs just 5.7 kg. Designed by Laser sailors.

Size: 125 x 75 cm

The personalizable 80 mm long vane float prevents loosing your wind indicator. Just slide the vane float easily on the wind indicator needle and the wind indicator will float when it comes in the water.

Allen Brothers Laser / ILCA Lower Vang Unit.

This Laser vang unit offers ultimate control over your vang control line. The cam cleat is mounted to a swivel, this ensures you can pull the vang control line from any angle and with minimal friction.

The block formation of our Laser / ILCA vang unit ensures the vang control line does not twist under load.

Easily attached to the Laser / ILCA mast tang with a nut and bolt.

Also featured is a removable clevis pin which can be used to dead-end the Cunningham control line.

This product is ILCA and Laser class legal.

Laser/ ILCA control line cam cleats with angled base, Pro-lead and wire under-fairleads.

The base has been optimised with a small angle to ensure the control lines can easily be adjusted when hiking and the Pro-lead ensures the rope guides easily into the mouth of the cam cleat from any angle.

This product is ILCA and Laser class legal.

Stainless steel shackle key, suitable to screw pin and slotted head shackles. 8, 10, 13 mm open end spanner and bottle opener.

The shackle key is 10 cm long.

4 mm stainless stell shackle.

5 mm stainless stell shackle.