Other classes

This wind indicator from Windesign Sailing has a stronger vane-arm which is accurately balanced and performs amazing sensitive.

This wind indicator from Windesign Sailing has a stronger vane-arm which is accurately balanced and performs amazing sensitive.

Holt´s universal flexible tiller joint

Holt/Nautos 30mm Dynamic Ball Snatch Block.

Ideal for use on twinning Lines, sheet tidy, continuous furlers and code zero take ups

Holt/Nautos Plain 45mm violin swivel With cleat and becket.

High tensile carbon composite body. Strong and lightweight. Locking tri-rivet head maintains sheave rotation under higher loads.

Ideal for use on: mainsheet systems, control Lines, sheet blocks, vang cascades, cunningham systems and halyard leads.

Set of 2 high quality extra long load straps with protection behind the buckle

Set of 2 high quality extra long load straps with protection behind the buckle

Top quality, long-life topcover for Laser and ILCA, made of Moistureguard 2000.

This light grey economy top cover is made of strong and flexible solution dyed PVC coated polyester, which is water resistant and offers a good UV protection.

This wind indicator from Windesign Sailing has a stronger vane-arm which is accurately balanced and performs amazing sensitive.

This wind indicator from Windesign Sailing has a stronger vane-arm which is accurately balanced and performs amazing sensitive.

Armare single braid rope with polypropylene, Cordura® and polyester

Mini reel 2.2mm Vectran line black with gold fleck. Suitable Optimist corner ties.

A heavy duty Dyneema® scissors. Ideal to cut your lines for splicing.

Cuts: Dyneema®, Vectran®, Spectra® and Kevlar®

Replacement vane for the Windesign wind indicators EX1243 and EX2021.

The personalizable 80 mm long vane float prevents loosing your wind indicator. Just slide the vane float easily on the wind indicator needle and the wind indicator will float when it comes in the water.

Mini reel 1.2mm Vectran line black with gold fleck. Suitable Optimist ties.

Holt/Nautos block stand up base. Available in three different sizes. 

(please see chart below)

Holt splicing needles set.

Includes

• 4mm needle - 1 pc
• 5.5mm needle - 1 pc

Holt splicing needle

Hard anodised CL270AN Micro Clamcleat.

The side entry fairlead allows ropes to be hooked in for cleating, yet easily removed. Small, neat and lightweight. Advanced tooth technology to hold all types of small rope. Integral becket allows riggging with a 2:1 ratio, without extra parts. Applications include Canoes & Kayaks (seat & rudder lines); Dinghy tiller lines. Manufactured from aluminium for light weight and durable performance.

The Clamcleat® CL277 is available in two finishes:

1. CL277 has a silver stove enamel finish for a cost effective, high quality coating.
2. CL277AN has a hard anodised finish to give a hard wearing surface.

CL278 is the Port version of this cleat. Using a CL823 Tapered Pad can aid rope alignment.

Mini reel 1.2mm Vectran line black with gold fleck. Suitable Optimist ties.

Mini reel 2.2mm Vectran line black with gold fleck. Suitable Optimist corner ties, fluor yellow

Stainless steel shackle key, suitable to screw pin and slotted head shackles. 8, 10, 13 mm open end spanner and bottle opener.

The shackle key is 10 cm long.

4 mm stainless stell shackle.

5 mm stainless stell shackle.

Stainless steel flat shackle.

Stainless steel flat shackle.

Very strong alloy cleat, hard anodized. Used as Laser/ILCA outhaul and traveler cleat.

• Line diameter: 3 – 6 mm
• Hole centres: 66 mm
• Length: 82 mm
• Width: 18 mm
• Height: 23 mm
• Bolt size: M5
• Screw size: 4.8
• Weight: 34 gms

16 mmHPN rope stopper ball.

Maximum rope diameter: 5 mm. 

Available in blue, red, green, black and white

Vernier adjuster, ideal for dinghy sailiing

Low-friction 40mm web tie sheave. 

Specifications

• Rope diameter: 2 a 10 mm
• Breaking load: 1800 Kg. 
• Safe working load: 900 Kg.
• Weight: 17.5 g. 

Clamcleat CL218 Mk1 with side entry fairlead.

The side entry fairlead allows ropes to be hooked in for cleating, yet easily removed. Ideal as a reaching hook.

Lightweight aluminium trolley for the Laser Pico.

Spring locking quick release of all parts allows the trolley to be disassembled in a matter of seconds for storage and travel. The frame has welded joints and is anodized to prevent corrosion. This trolley is supplied with 8 mm stainless steel push button wheel locks which are mounted inside the stainless steel axles. Supplied with the large Durastar-lite puncture proof wheels, v-supports, side supports and heavy duty 90 mm wide polyester webbing belt.

The lightweight dinghy trolleys from Windesign are designed to be the most functional available. With multiple length sections and 3 different angle connectors we can create a trolley for almost every dinghy.

Mainsail and jib set for Laser Pico.

This set consists of a mainsail and jib made out of 4 OZ blue Dacron sailcloth. The jib incorporates a 3mm stainless steel forestay. Comes with a sailbag.