Other classes

Optimist foils fully padded bag.

The standard wind indicator from Optiparts has a red PVC flag on a wire frame, which is currently used on many Optimists and other dinghies.

Optiparts' compressed sponge stick that grows from a compressed stick to a full sized sponge.

Optparts double tapered mainsheet for Optimist.

Rooster's Polilite rope, ideal for Laser/ILCA. 14 meters in length, 7 mm diameter

The combination of black Technora, Dyneema, Polyester & Cordura creates the most advanced Optimist double tapered mainsheet on the market. This Optimist mainsheet has extremely good wear resistance characteristics, has a total length of 7.6 meter and is double tapered from 9.0 to 6.5 mm.

Rooster's Polilite rope, ideal for Laser/ILCA. 14 meters in length.

Single handed grey paddle

Single handed orange paddle

The traditional blow molded Optimist hand bailer. 

Set of 10 replacement o-rings for the Laser/ILCA auto bailer.

Drain plug assembly for the Laser and ILCA.

Small boat hand bailer for Optimist sailing schools and other dinghies.

Neoprene sleeve bottle holder with adjustable webbing straps at each end to fit around different circumferences of tube.

Rooster's Polilite rope, ideal for mainsheet applications on racing dinghies.

Composite ball bearing cam cleat as supplied with the Laser cleat plate.

Flexible 40mm PVC boot to mount under ratchet blocks. 

Armare single braid rope with polypropylene, Cordura® and polyester

Clamcleat CL270 Racing Micro with Becket.

The becket holds the end of the rope under the cleat. No need for an extra fixing when rigging for 2:1 advantage. Small, neat and lightweight. The fairlead guides the rope into the teeth and advanced tooth technology holds all types of small rope.

The CL270AN is used on Laser tillers to give a 4:1 advantage without using a pulley block - see photo.

Manufactured from aluminium for a light weight and durable performance the Clamcleat® CL270 is available in two finishes:

1. CL270 has a silver stove enamel finish for a cost effective, high quality coating
2. CL270AN has a hard anodised finish to give a hard wearing surface.

Optiparts protest flag

Optiparts' spring clip for securing the trolley wheels

Optiparts telltales for dinghy sails (8 red and 8 green). Includes adhesive discs to fix the telltales to the sail.

Stainless steel push button wheel lock for the Optiparts Optimist trolleys.

Pin diameter: 8 mm

A pack of three green and three red self adhesive wool telltales (with TEFLON treatment) that don´t stick to the sail in the wet.

Sail numbers for Laser and ILCA sails and others. Suitable for ILCA 6 and ILCA 7.

• Size: 30,5 cm.
• Available colors: black, blue and red.

Holt/Nautos 27 mm small stainless steel eye.

• Line size: 2 - 7 mm
• Hole centres: 27 mm
• Fixing size: M4

Always carry a whistle with you during your sailing session. This pea-less nautical whistle comes with lanyard and has a clip for easy attachment.

It’s flat so it fits easily in your buoyancy aid front pocket.

Small stainless steel safety snap shackle for the Optimist mainsheet. Also suitable for other classes

Lengt: 34 mm

Weight: 16 g

Sail numbers for Laser and ILCA sails and others. Suitable for ILCA 6 and ILCA 7.

• Size: 30,5 cm.
• Available colors: black, blue and red.

Sail numbers for Optimist, Laser 4-7 and ILCA 4 sails, and other classes.

• Size: 23,5 cm.
• Available colors: black, blue and red.

30.5 cm digital sail number. Suitable for Laser Radial, Laser Standard, ILCA 6 and ILCA 7. 

Also suitable for other classes. 

Rooster Sailing self adhesive grip tape for use on your deck.

Moulds to fit the surface applied to providing a strong connection and durable grip. When you want to remove it, it's easy and clean and does not leave any residue when peeled off.

Available in a number of colours.

• Width: 100 mm
• Length: 2 meters
• Thickness: 2.5 mm

Solid puncture and temperature proof wheel.

Diameter: 26 cm

Suitable for 25 (1″) x 75 mm axles

Large Optiflex-lite puncture proof wheels for Optiparts Optimist trolleys, with a diameter of 37cm.

The Optiflex-lite trolley wheels are the ultimate in wheel design. They are ultra light; the weight is only 1750 grams. Suitable for 25 (1″) x 75 mm axles

This releasable rubber joint for 16 mm tiller extension is mounted with an aluminium pin only. The rope core will avoid complete failure should the rubber tear.

Mounted with pin which is kept in place by a piece of heat shrinkable tubing. The distance between the mounting hole centres of all joints is 32 mm.

To remove a joint: simply cut off the tubing and push the pin out.

Sail numbers for Laser and ILCA sails and others. Suitable for ILCA 4 and Optimist.

• Size: 23,5 cm.
• Available colors: black.

Holt/Nautos 38 mm aluminum cam cleat. 

• Line size: 5 - 12 mm
• Hole centres: 38 mm
• Fixing size: M5

Advanced metal replacement resin. Greater resistance to heat and UV stable. Lighter and stronger. Improved Jaw profle and vertical pillar design. Stronger and easier to release

Holt stainless steel spring

Round button spring locking system for the Optiparts Optimist trolleys and Windesign dinghy trolleys.

Screw plugs to mount the grabrail for Laser and ILCA. Set of 10 pcs.

Nylon sprit adjuster handle for the Optimist. For easier handling of the halyard. Suitable for 4mm lines.

Laser/ILCA open ended fairlead. Ideal for the traveller system.

Stainless stelle small eye base plate.

• Hole diameter: 4 mm

Grey nylon v-cleat, suitable for Optimist booms