Harken 40mm carbo ratchet block, used as Optimist mainsheet block and Laser mainsheet block.

Harken ball bearing cam cleats, 38 mm fastener spacing. Ideal for racing dinghies.

McLube Hullkote speed polish, for use on fiberglass, metal, plexiglass and painted surfaces

Size: 16 oz (423 ml)

A pack of three green and three red self adhesive wool telltales (with TEFLON treatment) that don´t stick to the sail in the wet.

Sail numbers for Laser and ILCA sails and others. Suitable for ILCA 6 and ILCA 7.

• Size: 30,5 cm.
• Available colors: black, blue and red.

A heavy duty Dyneema® scissors. Ideal to cut your lines for splicing.

Cuts: Dyneema®, Vectran®, Spectra® and Kevlar®

Holt/Nautos 27 mm small stainless steel eye.

• Line size: 2 - 7 mm
• Hole centres: 27 mm
• Fixing size: M4

Formuline is world renowned by windsurfers - the first and still the best line specifically designed for use on windsurf downhauls and outhauls. Formuline is the perfect diameter to fit most rigs and won't let you down - the ultimate rope for windsurfer downhauls and outhauls. High strength, light weight and incredibly durable.

Always carry a whistle with you during your sailing session. This pea-less nautical whistle comes with lanyard and has a clip for easy attachment.

It’s flat so it fits easily in your buoyancy aid front pocket.

Marlow's D2 Grandprix 78 Dyneema core with Technora/Polyester cover is ideal for as racing halyard or sheet. 

The upgrade to D2 Racing and ultimate standard production racing halyard or sheet. Manufactured using our bio-based D12 78 core or D12 99 core for additional strength and 50/50 Technora / Polyester cover to provide even greater performance in clutches, jammer and around winch's. Lightweight, low stretch, minimal creep with grippy, abrasion resistant cover for excellent jammer performance. D2 Grand Prix's blended cover grips well on winch drums and lasts during the toughest races thanks to its high melting point.

Small stainless steel safety snap shackle for the Optimist mainsheet. Also suitable for other classes

Lengt: 34 mm

Weight: 16 g

Sail numbers for Optimist, Laser 4-7 and ILCA 4 sails, and other classes.

• Size: 23,5 cm.
• Available colors: black, blue and red.

30.5 cm digital sail number. Suitable for Laser Radial, Laser Standard, ILCA 6 and ILCA 7. 

Also suitable for other classes. 

Rooster Sailing self adhesive grip tape for use on your deck.

Moulds to fit the surface applied to providing a strong connection and durable grip. When you want to remove it, it's easy and clean and does not leave any residue when peeled off.

Available in a number of colours.

• Width: 100 mm
• Length: 2 meters
• Thickness: 2.5 mm

Solid puncture and temperature proof wheel.

Diameter: 26 cm

Suitable for 25 (1″) x 75 mm axles

Large Optiflex-lite puncture proof wheels for Optiparts Optimist trolleys, with a diameter of 37cm.

The Optiflex-lite trolley wheels are the ultimate in wheel design. They are ultra light; the weight is only 1750 grams. Suitable for 25 (1″) x 75 mm axles

Replacement vane for the Windesign wind indicators EX1243 and EX2021.

The personalizable 80 mm long vane float prevents loosing your wind indicator. Just slide the vane float easily on the wind indicator needle and the wind indicator will float when it comes in the water.

This releasable rubber joint for 16 mm tiller extension is mounted with an aluminium pin only. The rope core will avoid complete failure should the rubber tear.

Mounted with pin which is kept in place by a piece of heat shrinkable tubing. The distance between the mounting hole centres of all joints is 32 mm.

To remove a joint: simply cut off the tubing and push the pin out.

Mini reel 1.2mm Vectran line black with gold fleck. Suitable Optimist ties.

Holt/Nautos block stand up base. Available in three different sizes. 

(please see chart below)

Holt splicing needles set.

Includes

• 4mm needle - 1 pc
• 5.5mm needle - 1 pc

Holt splicing needle

Sail numbers for Laser and ILCA sails and others. Suitable for ILCA 4 and Optimist.

• Size: 23,5 cm.
• Available colors: black.

Holt/Nautos 38 mm aluminum cam cleat. 

• Line size: 5 - 12 mm
• Hole centres: 38 mm
• Fixing size: M5

Advanced metal replacement resin. Greater resistance to heat and UV stable. Lighter and stronger. Improved Jaw profle and vertical pillar design. Stronger and easier to release

Holt stainless steel spring

Round button spring locking system for the Optiparts Optimist trolleys and Windesign dinghy trolleys.

Hard anodised CL270AN Micro Clamcleat.

The side entry fairlead allows ropes to be hooked in for cleating, yet easily removed. Small, neat and lightweight. Advanced tooth technology to hold all types of small rope. Integral becket allows riggging with a 2:1 ratio, without extra parts. Applications include Canoes & Kayaks (seat & rudder lines); Dinghy tiller lines. Manufactured from aluminium for light weight and durable performance.

The Clamcleat® CL277 is available in two finishes:

1. CL277 has a silver stove enamel finish for a cost effective, high quality coating.
2. CL277AN has a hard anodised finish to give a hard wearing surface.

CL278 is the Port version of this cleat. Using a CL823 Tapered Pad can aid rope alignment.

Harken 57mm carbo ratchet block with 1.5X grip, model 2166, used as Optimist mainsheet block and Laser mainsheet block.

Screw plugs to mount the grabrail for Laser and ILCA. Set of 10 pcs.

Harken 57mm carbo ratchet block, model 2135, used as Optimist mainsheet block and Laser mainsheet block.

Harken 40mm carbo block with swivel.