Optimast OP-5 Innovation trolley for Optimist. 

Optiparts black anodized aluminum tiller for Optimist

Low stretch, 100% Polyester rope offers great performance at a lower cost.

Stand-up kits feature a clatter-free rubber boot. You can attach the Dyneema link so that the block is aligned with the stand-up base or across it. It's a neat, low-profile solution which allows full articulation.

The 27 mm Optimist Silver regatta sprit has 15 cm anti chafe protection tubing.

The 32 mm Optimist SCHOOL boom has nylon in- and outboard end fittings, a nylon outhaul cleat and nylon fittings for mainsheet and downhaul attachment.

This Optimist Silver regatta mast is less stiff than Blackgold spars and is ideal for lightweight Optimist sailors who just started racing.

It’s made of high quality aluminium tube and fitted with:

• Aluminium halyard and downhaul Clamcleats EX1381
• Stainless steel hook-in block backing plate Plain bearing hook-in block EX1340
• Plain bearing 19 mm halyard block EX1332
• Low friction wind indicator EX1243
• Set of nylon top pins EX1338
• Pin stop EX13372
• Blue measurement band sticker EX1333B
• 4 mm 2:1 polyester halyard

Harken hook-in block for the Optimist halyard system.

TRD's Magic trolley for Optimist. Easy to disassemble, includes a travel bag

Optipart's Deluxe Jamaica special Optimist tiller extension, black anodized aluminium with a releasable rubber joint / swivel and long multicoloured foam grip.

• Length: 60 cm.
• Diameter: 16 mm.
• Weight: 120 g.

Marlow's High strength, lightweight with 100% Polyester cover and Dyneema® core for all round use on halyards, sheets and control lines.

The RF2455 stand-up kit features a clatter-free rubber boot. You can attach the Dyneema link so that the block is aligned with the stand-up base or across it. It’s a neat, low-profile solution which allows full articulation.

A lightweight yet ultra stiff and powerful 48 mm racing boom which is mainly suitable for the more experienced, heavier weight sailors above 45 kg.

8-meter glide tape roll for the Optimist daggerboard.

Approximately 2 meters of this tape are needed for an Optimist.

The Optimist Uograded school sprit from Optiparts has blue sprit ends and 15 cm black tubing for protecting damage between the Optimist mast and the sprit.

Optiparts school mast.

The most basic mast in the range, ideal for schools and sailing club fleets. Fitted with stainless steel halyard and downhaul cleat.

Optimast Green spar set

Stainless steel push button wheel lock for the Optiparts Optimist trolleys.

Pin diameter: 8 mm

Optiparts hook-in block for the Optimist sprit halyard system

RWO Omniflex Joint with rope core in case the rubber joint fails. Suitable for extensions with an internal tube diameter of 13mm, hole centers 32mm.

Optparts double tapered mainsheet for Optimist.

Single handed grey paddle

The lightweight alternative to a block, with no moving parts these are an extremely low maintainance item.

Windesign's rings are hard anodized with PTFE coating to provide the smoothest wear resistant surface possible.

To see the size chart, please check the description below.

Solid puncture and temperature proof wheel.

Diameter: 26 cm

Suitable for 25 (1″) x 75 mm axles

The Optimist Upgraded school mast from Optiparts is fitted with a stainless steel halyard block, aluminium Clamcleats, a nylon pin stop and two stainless steel eyes for fixing the head of the sail.

RWO Omniflex Joint. Suitable for extensions with an internal tube diameter of 13mm, hole centers 32mm.

Replacement halyard line for Optimist sprit. 3mm Dyneema halyard with 2 spliced loops. 

Single handed orange paddle

Harken 40mm carbo block with swivel.

Holt stainless steel spring

Large Optiflex-lite puncture proof wheels for Optiparts Optimist trolleys, with a diameter of 37cm.

The Optiflex-lite trolley wheels are the ultimate in wheel design. They are ultra light; the weight is only 1750 grams. Suitable for 25 (1″) x 75 mm axles

Optiparts´rudder retaining clip for Optimist rudder blades up to 15 mm thick.

The only perfect rudder retaining clip for the Optimist rudder blade.

A special edition 36 cm long lightweight, thick EVA foam grip.

This grip weighs only 26 grams.

The combination of black Technora, Dyneema, Polyester & Cordura creates the most advanced Optimist double tapered mainsheet on the market. This Optimist mainsheet has extremely good wear resistance characteristics, has a total length of 7.6 meter and is double tapered from 9.0 to 6.5 mm.

The traditional blow molded Optimist hand bailer. 

Hard anodized aluminium clamcleat for downhaul on the Optimist mast.

The 16 mm is Harken’s smallest block. It is perfect for small synthetic control lines found on high-tech dinghies.

The patented bearing system uses stainless steel balls in a captive grooved race and has a 250 lb (113 kg) maximum working load.

The 404 uses an O-ring to keep the line in the sheave during intermittent loading.

Round button spring locking system for the Optiparts Optimist trolleys and Windesign dinghy trolleys.

This releasable rubber joint for 16 mm tiller extension is mounted with an aluminium pin only. The rope core will avoid complete failure should the rubber tear.

Mounted with pin which is kept in place by a piece of heat shrinkable tubing. The distance between the mounting hole centres of all joints is 32 mm.

To remove a joint: simply cut off the tubing and push the pin out.

A special edition 36 cm long lightweight, thick EVA foam grip.

This grip weighs only 26 grams.

Optiparts telltales for dinghy sails (8 red and 8 green). Includes adhesive discs to fix the telltales to the sail.

Mini reel 2.2mm Vectran line black with gold fleck. Suitable Optimist corner ties.

Set of 2 high quality extra long load straps with protection behind the buckle

Grey nylon v-cleat, suitable for Optimist booms

PRO Daggerboard insert for Optimist.

This package includes 2 PRO front daggerboard inserts, 2 PRO back daggerboard inserts, made of wear resistant TPU rubber and comes with glue and sandpaper.

The PRO daggerboard inserts offer advantages over the EX1116; non-slip edges for improved grip within the daggerboard case, a pre-shaped contour to simplify positioning of the daggerboard and a sloping top design to prevent losing the inserts.

Replacement vane for the Windesign wind indicators EX1243 and EX2021.

A pack of three green and three red self adhesive wool telltales (with TEFLON treatment) that don´t stick to the sail in the wet.

Flexible 40mm PVC boot to mount under ratchet blocks. 

Set of 2 high quality extra long load straps with protection behind the buckle

Black anodized Optiparts aluminium tiller extension with a releasable rubber joint and a black end knob which makes the tiller extension super smooth.

Designed to maximum allowed length.

• Length: 65 cm.
• Diameter: 16 mm.
• Weight: 115 g.

A heavy duty Dyneema® scissors. Ideal to cut your lines for splicing.

Cuts: Dyneema®, Vectran®, Spectra® and Kevlar®

Small boat hand bailer for Optimist sailing schools and other dinghies.